Modern Australian
Times Advertising

Melbourne or Sydney? This is how our two biggest cities compare for liveability

  • Written by Lucy Gunn, Research Fellow, Healthy Liveable Cities Group, Centre for Urban Research, RMIT University, RMIT University

The question of which city is the most liveable is an annual hot topic. Competition is fierce, especially between Melbourne and Sydney. We have previously highlighted the limitations of The Economist Intelligence Unit Global Liveability Index. In this article we analyse the differences between Sydney and Melbourne using clearly defined liveability indicators based on objective spatial data.

Liveability is an important concept with implications for health and well-being that go beyond promotional material or the prestige of being named number one. As part of our Creating Liveable Cities project, in July we released a scorecard looking at the liveability of Sydney. The scorecard for Melbourne comes out today.

Read more: The world's 'most liveable city' title isn't a measure of the things most of us actually care about

For this research, we mapped policies designed to create liveable cities. We found great variation in these policies. Both cities do well on some but not all aspects of liveability.

We also found inequities in the delivery of infrastructure relating to liveability policies in both cities. Some suburbs do better than others, but in both cities suburbs on the urban fringe are less liveable. These areas often have poor access to the basic amenities needed for daily living.

So, let’s take a closer look at the liveability of Melbourne and Sydney.

Public transport access

Melbourne has an ambitious policy for public transport access. This requires 95% of residences to be within a 400-metre walk to a bus stop, 600m to a tram stop, or 800m to a train station. At present, 69% of residences meet this target.

The policy we measured spatially for Sydney is even more stringent. It requires 100% of residences to be close to public transport – within 400m of a bus stop with a service every 30 minutes, or 800m of a train station with a service every 15 minutes. Only 38% of residences and 2% of suburbs meet this target.

To create a consistent comparison between Sydney and Melbourne, we developed a common national liveability indicator that measures access (within 400m) to frequent public transport (a 30-minute service frequency). Results using this indicator were very similar: 36% of residences in Melbourne achieved this, compared to 35% in Sydney.

In both cities, however, inner and more established suburbs have the best public transport access. Many middle and outer suburbs miss out (Figure 1).

Melbourne or Sydney? This is how our two biggest cities compare for liveability Figure 1: Percentage of residences by suburb within 400m of a public transport stop with a service every 30 minutes. Author provided

Read more: Some suburbs are being short-changed on services and liveability – which ones and what's the solution?

Another important liveability indicator measures how people get to work. This is especially important with growing population, increased traffic congestion and longer commuting times. Our research shows cities are healthier, more liveable and sustainable when walking, cycling and public transport are more convenient than driving.

Residents of Sydney are more likely to use public transport (26%) than residents of Melbourne (18%). The proportions who walk or cycle to work in each city are similar (6% Sydney, 5% in Melbourne). Both Melbourne and Sydney are doing well relative to other Australian cities.

By international standards, though, we have a long way to go. For instance, 50% of people (and 63% of MPs!) in Denmark’s capital, Copenhagen, commute daily by bike.

Walkability

Coinciding with good access to public transport are walkable areas, which combine somewhere to walk (to local shops and services), population density (to support the services) and a way to get there (connected road network). Walkable neighbourhoods are the backbone of a liveable city.

Figure 2 shows that in both Sydney and Melbourne inner areas have the highest walkability. This declines dramatically towards the urban fringe. Yet neither city has policies in place to achieve walkable neighbourhoods in the suburbs.

Melbourne or Sydney? This is how our two biggest cities compare for liveability Figure 2: Composite walkability indicator* for suburbs within each capital city. Author provided

Read more: Young people want walkable neighbourhoods, but safety is a worry

Walkability is also unlikely to be achieved with population density requirements set at only 15 dwellings per hectare. That’s too low to achieve walkable neighbourhoods.

Higher residential densities ensure there are enough people and the associated demand to support the transport and everyday services that help make cities liveable. Research is now showing that this requires higher densities of at least 25 dwellings per hectare, and even higher around activity centres and transport nodes.

Suburban densities are higher in Sydney, at 19 dwellings per hectare, than in Melbourne, which has only 13 dwellings per hectare.

Better policies create better cities

So to the question: which is the most liveable city? The answer in turn depends on another question: liveable for whom? Both cities have areas performing well on some liveability domains and other areas where more could be done.

The findings of these reports show a need for more ambitious policies, research evidence linking liveability indicators to health and well-being, and investment in infrastructure and spatial planning to improve liveability, health and well-being for all residents of all cities.

Read more: This is what our cities need to do to be truly liveable for all

Authors: Lucy Gunn, Research Fellow, Healthy Liveable Cities Group, Centre for Urban Research, RMIT University, RMIT University

Read more http://theconversation.com/melbourne-or-sydney-this-is-how-our-two-biggest-cities-compare-for-liveability-102247

Pest Control Albury: Protecting Your Property From Hidden Damage And Health Risks

Pests rarely announce their arrival. They creep into spaces quietly, turning small, unnoticed corners into breeding grounds for bigger problems. Tha...

Why Root Canal Treatment Melbourne Is Essential For Saving Natural Teeth

Tooth pain has a way of demanding attention at the worst possible time. When the discomfort becomes persistent and intense, it often signals an infe...

How Bird Flight Diverters Help Protect Wildlife Around Power Infrastructure

Power infrastructure plays an essential role in modern life, but it can also create risks for wildlife, particularly birds moving through establishe...

What Businesses Should Look for in a Commercial Coffee Partner

Choosing a commercial coffee partner is not the same as choosing a machine. It is a broader decision that affects beverage quality, staff efficiency...

3PL Logistics Australia Driving Smarter Supply Chains And Faster Deliveries

In a world where customers expect speed almost as much as quality, logistics has become the silent heartbeat of every successful business. Behind th...

Why Professional Electrical Services Are Essential For Modern Properties

Electricity powers almost every aspect of daily life, from lighting and appliances to complex systems in homes and businesses. This makes choosing a...

What Not to Pack When Moving: The Essential Guide to Smart Packing

Moving house is one of those all-encompassing events in life and most people focus their energy on deciding what to pack. But knowing what not to pa...

From Assistance to Independence: Progression in Daily Living Skills

The ultimate goal of many support systems is to empower individuals to lead lives defined by autonomy and self-reliance. While some support requiremen...

The Cost Difference Between Early Repairs and Delayed Replacement

Automotive maintenance often involves a choice between addressing a small issue immediately or waiting until a component fails completely. When it c...

What Is a Stainless Steel Bar? Applications, Benefits, and Buying Tips

Stainless steel is one of the most widely used materials across industrial and commercial sectors, known for its strength, corrosion resistance, and...

Scholars in Developing Nations Depending on Z library

Access to books often shapes the course of study for scholars who live in regions with thin library shelves and slow supply chains. Many students wo...

6 Cheapest POS Systems in Australia (2026)

The cheapest POS systems in Australia for 2026 are POSApt, Square, Zeller, Loyverse, Epos Now, and Shopify POS (Lite). However, “cheap” does no...

The Ultimate Guide to Automating Your Weekend Yard Chores

We all look forward to the weekend as a chance to unwind after a long week of work. You probably picture yourself relaxing on the patio with a cold ...

How Ignoring Regular Car Servicing Can Lead to Costly Repairs

Owning a car gives you a sweet sense of freedom and comfort. You can go wherever you want, whenever you want. But with that freedom comes responsibili...

Someone Trips at Your Fundraiser. Now What? Understanding Public Liability for NFPs

Three months of planning. Volunteers giving up their weekends. Sponsorships chased, catering sorted, tables decorated. And then, about an hour into ...

Stainless Steel Tube: A Complete Specification Guide for Engineers, Project Managers, and Industrial Buyers

Few materials in the industrial and manufacturing world are as universally relied upon — or as frequently misspecified — as stainless steel tube...

How to Choose the Right Barber Shears Scissors for Professional Results

Since a barber is only as good as their tool, choosing the right barber shear scissor must not be taken lightly. Most barbers end up buying the first ...

Why Commercial Construction Companies Play A Critical Role In Modern Urban Development

Urban development requires highly organised planning, engineering expertise, and professional construction teams capable of delivering complex build...