Modern Australian
The Times

Rising cyclist death toll is mainly due to drivers, so change the road laws and culture

  • Written by Peter Chambers, Senior Lecturer in Criminology and Justice, RMIT University
Rising cyclist death toll is mainly due to drivers, so change the road laws and culture

Recent reporting paints a picture of surging road deaths and failing safety strategies for cyclists. The Australian Automobile Association’s Benchmarking report records 1,222 road deaths in the year ending June 2018. And cyclist deaths in particular remain stubbornly high, even as average speeds, which affect road deaths, continue to decline. If cars are much safer than 25 years ago, why are cyclist deaths increasing, from 25 the previous year to 45 this past year?

Of the untimely road deaths the AAA reports, 1,100 are due to how drivers were driving. In Australia, drivers are to blame for at least 79% of accidents with cyclists. And roughly 85% of reported cyclist casualty crashes involve another vehicle, not a bike or a pedestrian. Driver distraction accounts for roughly 25% of accidents.

These stats highlight a clear pattern of deadly harm: drivers hitting people, because of how they’re driving, is 90% of the problem on our roads.

Read more: Cars, bicycles and the fatal myth of equal reciprocity

What’s wrong with current safety strategies?

Calls are often made to install separation infrastructure and high-tech sensors in cars to fix the problem, as if the problem is cars and bikes mixing. These calls often follow the publication of reports or the deaths of cyclists in ways that make the news. Such claims are seldom met with critical scrutiny.

Although better infrastructure is needed and warranted, and high-tech sensors might reduce harm, people are still being needlessly killed. Mostly, that’s due to how people drive.

System-wide infrastructure and high-tech improvements are complex and take years or decades to complete. Installation has to be standardised and comprehensive to be truly effective. State-led infrastructure projects are often subject to budget blowouts. In crucial cases, the public has been left without the promised solution or service – regardless of whether it was publicly or privately led.

More deeply, calls for technical saviours are essentially wrongheaded because they disregard the root cause of the problems: driver behaviour – specifically, aggression and inattention. Separation of transport modes can’t fix aggression and inattention.

Indeed, separation contributes to irresponsibility by baking the assumption of danger and vulnerability into infrastructure. It works by diminishing the need for care and attention on the part of those responsible for the greatest harm: drivers.

This approach, we argue, reiterates a stigmatising, criminogenic understanding of bikes as inappropriate, unsafe and unwelcome on “our” roads. In this context, words are not weapons, but when they create aggressive drivers they do weaponise.

Read more: More people will cycle when everyone accepts cyclists' right to be on the road

We need to focus on primary prevention

We’re clearly failing one another here. One way to begin responding better is by taking wisdom and insight from primary prevention approaches to male violence against women. This starts by acknowledging the root cause of systemic instances of deadly violence is banal, routine and excused and explained away because of its alignment with dominant cultural values.

Read more: Change the story: how the world's first national framework can help prevent violence against women

The next step is to respond in ways that keep returning attention to the facts from best evidence. To repeat, whether you’re a driver, occupant, pedestrian or cyclist, roughly 90% of what causes death on Australia’s roads is driver behaviour.

For cyclists, the root cause of deadly harm is aggression and inattention. Drivers should be held to account and be pushed to change their behaviour and attitudes.

So what changes are needed?

Simple inexpensive changes in the law have been found to have dramatic effects on driver behaviour. These changes also work with existing infrastructure, technology, road conditions and our cultural expressions of human nature.

One change that’s in line with primary prevention and strong evidence of success is a move to a model of presumed liability for drivers. This would be a hard sell in light of current settings here, which support and excuse deadly violence by drivers because of the dominant motoring culture. But it’s proven to work in the Netherlands.

Read more: Cars overwhelmingly cause bike collisions, and the law should reflect that

Another welcome measure is a recent initiative to reduce urban speed limits to 30km/h. This has just been implemented in one of Melbourne’s inner urban areas without too much fuss. According to the research behind it, you’re twice as likely to survive being hit at 30km/h as at 40km/h.

Time will tell, but evidence suggests this change will reduce harm and improve traffic flows. As with moving to presumed liability, it does so without expensive infrastructure and unproven gizmos, while following the wisdom of primary prevention by putting the onus on the root cause rather than the victim.

Finally, we urge that this issue be considered as one of universal access to safe transport infrastructure. It’s not about “cars versus bikes”; it’s about the simple right to get where you’re going safely and sensibly. This shouldn’t be a privilege that’s extended only to those with the resources and bodies capable of driving.

In light of this, it’s crucial we note that cars are deadly, that 90% of the problem is driver behaviour, and that the motor car fails on its promise of delivering safe, efficient urban transport.

Read more: Contested spaces: 'virtuous drivers, malicious cyclists' mindset gets us nowhere

Authors: Peter Chambers, Senior Lecturer in Criminology and Justice, RMIT University

Read more http://theconversation.com/rising-cyclist-death-toll-is-mainly-due-to-drivers-so-change-the-road-laws-and-culture-102567

Why People Regain Weight After Weight Loss?

Losing weight is hard; keeping it off is harder; and regaining it after all that effort is something many people go through more than most realise. ...

10 Benefits of Having a Frozen Yoghurt Machine for Your Business

Frozen yoghurt is a commercially viable dessert option for a wide range of food service businesses due to its versatility, efficiency, and consisten...

Why Slurry Hose is Essential For High-Performance Material Transfer

Handling abrasive and dense materials efficiently requires specialised equipment, which is why a slurry hose is a critical component in industries ...

Why Coworking Spaces In Melbourne Are Transforming The Way Professionals Work

The modern workforce is evolving rapidly, with flexibility, collaboration, and efficiency becoming central to how people work, which is why a coworkin...

The Everyday Wear and Tear Most Warehouse Storage Systems Experience

The modern warehouse is a dynamic, high velocity environment where industrial storage structures are subjected to immense, continuous physical stres...

Why Pendant Lights Continue To Be A Popular Choice In Modern Interiors

Lighting has become an essential design element in modern homes, influencing both the appearance and functionality of interior spaces. Many homeowne...

How Whiteboard Supports Structured Communication In Work And Learning Environments

Clear communication and structured planning are essential in both professional and educational settings, which is why a whiteboard remains a practi...

How A Cardboard Box Manufacturer Supports Modern Packaging Needs

Packaging has become an essential part of modern business operations across retail, manufacturing, logistics, and e-commerce industries. Many busine...

How Pallet Racking Helps Businesses Improve Warehouse Operations

Efficient warehouse management depends on reliable storage systems that support organisation, safety, and productivity. Many businesses use pallet rac...

Why I/O Controller Is Essential For Efficient Industrial Automation Systems

Modern industrial systems rely heavily on automation and precise data exchange, which is why an I/O controller plays a critical role in ensuring sm...

Why Modern Traffic Management Systems Are Important For Safer Roads

Cities and industrial facilities increasingly rely on advanced Traffic Light System technology to improve road safety, traffic flow, and operationa...

How Structured eCommerce Web Design Influences Online Buying Behaviour

A strong online presence begins with effective eCommerce web design that prioritises both functionality and user experience. Businesses entering or...

What People Mean by “Alternative Doctor” And Why Expectations Around Care Are Changing

When people search for an “alternative doctor,” they’re usually looking for something specific, even if they haven’t fully defined it yet. I...

Why Does My Power Keep Tripping? Common Causes Explained by Electricians Sydney

The electrical system is the lifeblood of your home, powering everything from your phones to cooking utensils and more. But from time to time, your po...

Interstate Car Transporter Urges Buyers to Book Early

As the conflict in the Middle East continues to put increasing pressure on local fuel supply, Australian transport companies are experiencing increasi...

Digital Minimalism for Business Owners: Fewer Tools, Better Systems

Be honest. How many apps are open right now? One for scheduling, another for invoices, a third for customer notes, plus a spreadsheet someone email...

The Importance Of Proactive NDIS Renewal Preparation For Sustaining Your Provider Business

Your NDIS renewal notice is not a signal to start preparing. By the time it arrives, preparation should already be well underway. For new providers, s...

Why Fire Extinguisher Testing in Sydney Is Becoming a Records Game, Not Only a Maintenance Job

A fire extinguisher used to feel like one of the simpler parts of building safety. It hung on the wall, wore a service tag, and sat there quietly unle...