Modern Australian
Times Advertising

The science of parkour, the sport that seems reckless but takes poise and skill

  • Written by James L Croft, Lecturer, Motor Control and Skill Acquisition, Edith Cowan University

People climbing up walls and jumping off buildings in films such as Brick Mansions, Assassin’s Creed, and Casino Royal aren’t tricks of cinema.

The athletes that perform these stunts are part of a global community that practise parkour – a gymnastics-like activity that developed from military obstacle courses. The objective of parkour is to move rapidly and effectively through a complex physical environment.

Our research shows that science can help you practise better parkour – through running up walls more efficiently, and expanding your landing options.

Even if you don’t plan to take up the sport, it’s an incredible thing to watch.

This is parkour.

Traceurs and traceuses

Although parkour has been recognised as an official sport in some countries, it’s impossible to determine how many people are involved worldwide. It’s an activity that is generally unorganised, which may be part of its sub-culture appeal.

To a casual observer, parkour athletes may appear reckless – but most train very hard, practising a broad set of individual skills that they use as they run through the environment. Men and women in the sport are referred to as “traceurs” and “traceuses” respectively.

Some of the individual movements in parkour parallel those of other sports, such as gymnastics, athletics, and trail running.

But much less research has been done on parkour than on more mainstream sports. This is unfortunate because they shared fundamental principles of generating and redirecting momentum. A better understanding of these can benefit all of these activities.

A woman who does parkour is called a traceuse.

Running up walls

One impressive feat that catches the eye of many parkour observers is the way traceurs run up high walls to get onto buildings.

To climb high structures, parkour athletes run toward the wall and then kick off it with one (or more) contacts. This technique allows them to reach much higher than using a standing vertical jump, and also allows them to keep moving efficiently through the urban environment.

To investigate how athletes accomplish this wall run efficiently we embedded a force plate in the ground and a second force plate in the wall. We then filmed study participants as they approached the wall.

We watched how the athletes redirected their body by using a consistent transition strategy that depended on specific actions of the legs on the floor and wall.

Although some parkour guides recommend athletes straddle the floor and wall simultaneously, we did not observe this – the traceurs always left the floor before they contacted the wall.

The science of parkour, the sport that seems reckless but takes poise and skill Testing the launching capability of a traceur performing parkour. James Croft, Author provided

Redirecting momentum

We wanted to better understand the most efficient foot placement on the ground and the wall, and the effect of different approach speeds. So we built a computer simulation that could optimise each.

The model corresponded well with what we observed – an intermediate run-up speed is best – and allowed us to understand why.

During the run up you create horizontal momentum (the product of speed and body weight). Some of this horizontal momentum can be redirected into vertical momentum at take-off by keeping the leg on the ground rigid – a bit like a pole vault with a rigid pole.

If the approach run is slow there is less horizontal momentum to transfer to vertical momentum. Then the take-off leg has to create vertical momentum by using the leg muscles – which is less efficient.

With a very fast run-up, the take-off leg must act as a shock absorber, which wastes energy and wipes out the benefits of a faster approach.

So, traceurs naturally select an intermediate run-up speed, allowing them to use the least amount of energy to scale the wall.

To scale higher walls a faster approach may be required, but this also requires an ability to generate sufficient leg force. Greater speed does provide greater momentum but it also reduces the time available for the leg to generate the impulse (the product of force and time) necessary to scale the wall.

The science of parkour, the sport that seems reckless but takes poise and skill Parkour involves strategic transfer of force and momentum. objetivarte/flickr, CC BY

Returning to ground

What goes up must come down!

Our research on jumping off walls shows that the type of landing that traceurs choose is influenced by their height, body mass, and leg power.

Landing safely involves managing a number of different forces. Imagine you step or jump off an object – your body accelerates due to gravity. Upon landing, your body has a certain momentum that is determined by your weight and your speed. And the higher the object you jump off, the faster your landing speed and vertical momentum prior to landing.

The main task in landing is to dissipate your momentum in a way in which the load and speed (making up the accumulated energy level) do not exceed biological limits (leading to a muscle tear or tendon rupture).

The impact of momentum on the landing can be reduced by increasing the time over which landing forces apply.

The science of parkour, the sport that seems reckless but takes poise and skill Landing right is the key to injury prevention. Daniel Petty/flickr, CC BY

For instance, allowing the supporting joints to flex (that is, bend) over a greater range can gradually decrease momentum.

Alternatively, it is possible to redirect the force by converting momentum into rotational momentum with a roll. This means that force becomes oriented in a direction that does least harm.

The strategies that are available to an individual vary based on their body characteristics (such as height, weight, bone, joint and muscle strength, flexibility, and coordination). If the chosen strategy is insufficient to manage the momentum, injury to muscles or bones will result.

Roll into it

Unsurprisingly, through our research we found individuals were more likely to roll when landing from higher drops. Our study subjects (nine men and two women) ranged in height from 1.58-1.87 metres, and in weight from 54–92 kg.

At some heights a two-footed landing is not feasible. But in this study the maximum drop height was only 2.4 m and some traceurs chose not to roll even at this height.

People with long legs can apply a smaller force over a longer time as they gradually flex their legs to absorb the momentum, and we found evidence that shorter traceurs rolled at lower heights.

The science of parkour, the sport that seems reckless but takes poise and skill Not Spiderman, but not far off. THOR/flickr, CC BY

People who weigh a lot have more momentum when dropping from the same height as lighter people. We found this influenced the likelihood of rolling – heavier athletes were more likely to choose a roll landing when dropping from a lower height.

Athletes with greater leg power appeared capable of managing impulse absorption through their legs up to a greater drop height. And those with less explosive leg power were more likely to transition to a roll landing at a lower height.

While you can’t do much about your height, you can change your body mass and leg power through training. In practice, this gives more flexibility because you can select a landing strategy based on the situation rather than having to roll to dissipate momentum.

Authors: James L Croft, Lecturer, Motor Control and Skill Acquisition, Edith Cowan University

Read more http://theconversation.com/the-science-of-parkour-the-sport-that-seems-reckless-but-takes-poise-and-skill-110881

Why Protective Packaging Matters More Than Ever In Modern Shipping

In today’s fast-paced world of logistics and eCommerce, ensuring that products reach customers safely is a top priority. This is where a bubble wrap...

Pest Control Albury: Protecting Your Property From Hidden Damage And Health Risks

Pests rarely announce their arrival. They creep into spaces quietly, turning small, unnoticed corners into breeding grounds for bigger problems. Tha...

Why Root Canal Treatment Melbourne Is Essential For Saving Natural Teeth

Tooth pain has a way of demanding attention at the worst possible time. When the discomfort becomes persistent and intense, it often signals an infe...

How Bird Flight Diverters Help Protect Wildlife Around Power Infrastructure

Power infrastructure plays an essential role in modern life, but it can also create risks for wildlife, particularly birds moving through establishe...

What Businesses Should Look for in a Commercial Coffee Partner

Choosing a commercial coffee partner is not the same as choosing a machine. It is a broader decision that affects beverage quality, staff efficiency...

3PL Logistics Australia Driving Smarter Supply Chains And Faster Deliveries

In a world where customers expect speed almost as much as quality, logistics has become the silent heartbeat of every successful business. Behind th...

Why Professional Electrical Services Are Essential For Modern Properties

Electricity powers almost every aspect of daily life, from lighting and appliances to complex systems in homes and businesses. This makes choosing a...

What Not to Pack When Moving: The Essential Guide to Smart Packing

Moving house is one of those all-encompassing events in life and most people focus their energy on deciding what to pack. But knowing what not to pa...

From Assistance to Independence: Progression in Daily Living Skills

The ultimate goal of many support systems is to empower individuals to lead lives defined by autonomy and self-reliance. While some support requiremen...

The Cost Difference Between Early Repairs and Delayed Replacement

Automotive maintenance often involves a choice between addressing a small issue immediately or waiting until a component fails completely. When it c...

What Is a Stainless Steel Bar? Applications, Benefits, and Buying Tips

Stainless steel is one of the most widely used materials across industrial and commercial sectors, known for its strength, corrosion resistance, and...

Scholars in Developing Nations Depending on Z library

Access to books often shapes the course of study for scholars who live in regions with thin library shelves and slow supply chains. Many students wo...

6 Cheapest POS Systems in Australia (2026)

The cheapest POS systems in Australia for 2026 are POSApt, Square, Zeller, Loyverse, Epos Now, and Shopify POS (Lite). However, “cheap” does no...

The Ultimate Guide to Automating Your Weekend Yard Chores

We all look forward to the weekend as a chance to unwind after a long week of work. You probably picture yourself relaxing on the patio with a cold ...

How Ignoring Regular Car Servicing Can Lead to Costly Repairs

Owning a car gives you a sweet sense of freedom and comfort. You can go wherever you want, whenever you want. But with that freedom comes responsibili...

Someone Trips at Your Fundraiser. Now What? Understanding Public Liability for NFPs

Three months of planning. Volunteers giving up their weekends. Sponsorships chased, catering sorted, tables decorated. And then, about an hour into ...

Stainless Steel Tube: A Complete Specification Guide for Engineers, Project Managers, and Industrial Buyers

Few materials in the industrial and manufacturing world are as universally relied upon — or as frequently misspecified — as stainless steel tube...

How to Choose the Right Barber Shears Scissors for Professional Results

Since a barber is only as good as their tool, choosing the right barber shear scissor must not be taken lightly. Most barbers end up buying the first ...