Modern Australian
Men's Weekly

.

What actually is an ATAR? First of all it's a rank, not a score

  • Written by Tim Pitman, Senior Research Fellow, Curtin University

The Australian Tertiary Admissions Rank (ATAR) is a number mainly used by universities to select which students, out of high school, will be offered a place in a particular course.

The ATAR is not a score, it’s a rank. If a student gets an ATAR of 80, this doesn’t mean they averaged 80%. It means they performed as well as, or better than, 80% of the other students also graded.

How is an ATAR calculated?

Each state and territory does their own calculation of students’ ATAR. Although differing in certain details, they follow the same principles.

A student must be studying a minimum number of subjects that can be used in the final calculation. The specifics depend on state and territory.

In WA the calculation is based on a student’s four ATAR subjects and the student has to satisfy English competency requirements. In NSW, you have to study at least eight ATAR “units”, of which six have to be what are called Category A, plus two units of English. Category A units are defined as having “academic rigour” and a “depth of knowledge” required for tertiary studies. They include maths, English, science and history, as well as some arts and physical education subjects.

Queensland traditionally used something called an Overall Position, not the ATAR, but is moving to an ATAR in 2020.

Read more: Don't stress, your ATAR isn't the final call. There are many ways to get into university

In most cases, students are marked on how they did in the school assessments that count towards the ATAR. Again, this can differ across states.

In NSW, the assessments that count form part of the Higher School Certificate (HSC). In Victoria, it’s the Victorian Certificate of Education (VCE). In VCE, units 1 and 2 are generally taken in year 11, and units 3 and 4 in Year 12. Units 3 and 4 generally count for the ATAR, but sometimes the first two units also count, such as in some VET programs.

The purpose of providing these examples is to highlight how complicated the creation of an ATAR is and how much it is affected by local factors, including the state or territory you are in.

Using the relevant units, a raw score for each subject is created.

What actually is an ATAR? First of all it's a rank, not a score A raw score is then scaled to get a rank of where the student sits relative to their peers. from shutterstock.com

But remember, an ATAR is a rank, so the scores need to be re-interpreted as a rank. Each mark needs to be scaled, which means adjusting it so it can be more fairly compared with the marks for other students and subjects.

Scaling takes into account how competitive, not how difficult, a subject is.

One type of scaling considers where each subject’s mark ranks the student compared to the other students at the same school doing the same subject. Say a student gets 85% for a subject, if the average mark for their class was 90%, they will be ranked lower.

Another type of scaling considers how many students take a subject, and their average marks, compared to other subjects. This is because some subjects have relatively small numbers of students compared to others.

Unfortunately, advice - often on the internet - on how to “game” the system and get a higher ATAR is mostly incorrect. The best advice to ensure your best ATAR is, in the words of one admission centre,

to choose your studies according to what you are interested in; what you are good at; and what studies you need for future study.

What is the ATAR used for?

The main purpose of the ATAR is to determine who gets offered a place in a university course. Think of a queue. When places are limited, the closer to the front of the queue the student is, the more likely they will get in.

Some years there are less people in the queue, or more places in the course. These affect the ATAR required to get in.

Universities sometimes set minimum ATARs, either for a course or the university. So, the student can only apply to the university/course if they achieve this minimum.

A minimum might be set because the university believes this is the minimum ATAR required to succeed. It might also be a way of branding a course, or an entire university, as elite.

It could be a combination of both. And again, because it’s a queue, achieving the minimum still doesn’t guarantee a place.

Universities can and do sometimes make adjustments to its ATAR requirements. This might be due to special consideration - perhaps illness - or because the student received a bonus for studying a language other than English.

For example, for 2019 applicants, Curtin University published advice the minimum ATAR for the Bachelor of Advanced Science (Honours) in Coastal and Marine Science was 95. The minimum selection rank for that course actually ended up being 98.9 – above the university minimum. But at least one student was selected with an ATAR of 94.25 – slightly below the published minimum.

Why is the ATAR contentious?

An ATAR is primarily designed, and works best when it is used, as an efficient way of allocating limited places in a course in a first-come, first-served basis.

But because it’s a rank, it is not a direct representation of a student’s academic ability or potential to succeed in higher education. However, there is a correlation.

Read more: FactCheck: does your entrance score strongly correlate with your success at university?

A recent study by the University Admission Centre found:

the ATAR is the best available predictor of university success[…] The higher the ATAR, the higher the student’s first-year GPA is likely to be.

It also cautioned:

[…] the ATAR is not perfect. There will be instances where the prediction will ‘miss the mark’. Also, there will be cases where selection based on the ATAR alone would not be optimal.

There are always exceptions to the rule that ATAR can predict success. And these exceptions are not just numbers on a spreadsheet but people. For this and other reasons, many would like to see the ATAR scrapped.

But so far, agreement has not been reached on an alternative system that is fairer than the ATAR or as efficient.

In the meantime, it’s important to have alternative pathways to higher education for students who do not have the required ATAR but nonetheless have the capacity to succeed in higher education.

Authors: Tim Pitman, Senior Research Fellow, Curtin University

Read more http://theconversation.com/what-actually-is-an-atar-first-of-all-its-a-rank-not-a-score-126594

Considering Cryolipolysis Fat Freezing? Here’s What You Need to Know

Body confidence can shift over time, and sometimes even good diet and training can still leave a stubborn area of fat that won’t budge. If you’r...

From Local Tradie to Digital Leader: The Strategy Behind Auto Gate Guys Sydney’s Growth

For many small trade businesses, digital marketing still feels like a buzzword, not a necessity. They rely on word-of-mouth referrals, repeat clients...

Electric Automation System: Smarter Control for Modern Electrical Infrastructure

Modern buildings and industrial facilities are increasingly dependent on intelligent control and efficiency. An electric automation system brings t...

The Damp Truth: Why Your Overflowing Gutters Are an Open Invitation for Termites

When it comes to protecting your home, most people think about visible threats — storm damage, cracked tiles, break-ins. But one of the most destruc...

Is Your Inventory a Sitting Duck? 2 Critical Upgrades to Protect Your Business Assets and Your Bottom Line

Imagine this: you finish a long day on the job, lock up your tools, materials, and work vehicle in the garage, and head home. But overnight, someone b...

Electrician in Melbourne: Reliable Electrical Solutions for Homes and Businesses

Finding a dependable electrician Melbourne is essential when safety, efficiency, and long-term performance matter. Electrical systems form the back...

Rims and Tyres for Sale in Sydney: Performance, Safety, and Style Combined

Finding the right rims and tyres for sale Sydney is about far more than appearance. Tyres and rims directly influence how a vehicle handles, brakes...

Why Access to Doctors in Bundoora Is Essential for Ongoing Community Health

Reliable access to healthcare plays a vital role in maintaining physical wellbeing and peace of mind. Having trusted doctors in Bundoora available ...

Pendant Lights: Elevating Interior Spaces With Style and Purpose

Well-chosen pendant lights have the power to transform interiors by combining focused illumination with strong visual impact. More than just a ligh...

What Sets Professional Family Lawyers in Sydney Apart from General Lawyers?

Choosing the right legal support can make a noticeable difference when dealing with family-related matters. This article will explore what separates...

Balancing Teen Academic Expectations and Wellbeing

For many teenagers, school years are shaped by increasing expectations. Academic performance, future pathways, and comparison with peers can create pr...

Why Ceiling Fans Remain One of the Most Effective Solutions for Year-Round Comfort

Creating a comfortable indoor environment without relying heavily on energy-intensive systems is a priority for many households. Installing ceiling ...

Why an Industrial Air Compressor Is Vital for Modern Manufacturing

In many industrial environments, compressed air is as essential as electricity or water. An industrial air compressor provides the power needed to ...

Why Commercial Carpet Cleaning Services Matter for Professional Spaces

Clean carpets play a major role in shaping how a commercial space looks, feels, and functions. Commercial carpet cleaning services are essential fo...

5 Things to Consider Before Choosing a Commercial Painter

Choosing the right painter for a commercial business can be challenging. Regardless of the type and the size of the property, all commercial project...

Why Medical Fitout Melbourne Practices Rely on for Modern Healthcare Spaces

A well-planned medical fitout Melbourne is essential for creating healthcare environments that support patient care, clinical efficiency, and regula...

Luxury Builders Melbourne Crafting Homes Defined by Design and Detail

Building a premium home is about far more than size or appearance. It is about precision, craftsmanship, and a deep understanding of how refined spa...

Electric Sliding Door Solutions for Modern Living and Commercial Spaces

The way people move through spaces has changed dramatically over the years, and the electric sliding door has become a defining feature of that evol...