Modern Australian
Times Advertising

50,000 Australians a day are being tested for COVID-19. How to solve the maths that says the number should be 6.5 million

  • Written by Richard Holden, Professor of Economics, UNSW

As Victoria grapples with a second-wave outbreak of COVID-19, the importance of large-scale testing has again been highlighted.

Without its “testing blitz” aiming at 10,000 tests a day, the extent of the outbreak would have been invisible for much longer.

Read more: Australia's coronavirus testing rates are some of the best in the world – compare our stats using this interactive

Australia-wide, we’ve so far achieved a seven-day rolling average of a little more than 50,000 tests a day. The highest single-day record was 66,525 on June 22.

Since the beginning of the pandemic, proponents of mass testing having been arguing the need to test dramatically larger numbers.

One is US economist Paul Romer, who shared the 2018 Nobel Prize for economics for his work on the importance of knowledge and ideas in the economy. In late March he modelled a “frequent testing policy” in which:

7% of the population is randomly selected for testing each day. Over the 500 days illustrated in the plots and the animation, this means that the average person is tested about 30 times in 500 days – roughly once very two weeks.

This rate of testing would mean testing close to 2 million Australians a day. But even that is probably not enough.

The mathematics of mass testing

To appreciate why an even large number of tests is needed, imagine purely random testing is being used. That is, testing not focused on “hot spots” as has been the case in Melbourne.

Testing, tracing and isolating will only be effective if, on average, the process identifies cases before those people transmit the virus. Epidemiologists call the number of infections caused by a single case the “reproduction” (R) number. If it’s less than 1, the pandemic will die out. If it’s more than 1, the virus spreads.

When uncontrolled, COVID-19 spreads roughly once every six days. This corresponds to a reproduction number of 2.5 over the 15 days a person with COVID-19 is generally infectious.

Moreover, as Romer notes, current tests are far from perfect. He assumes a 20% false negative rate (tests results saying someone doesn’t have COVID-19 when they do) and a 1% false positive rate (results saying someone has it when they don’t).

The mathematics says to control the disease we need to test the entire population roughly every four days.

In a paper published by Harvard University’s Edmond J. Safra Center for Ethics, Divya Siddarth and Glen Weyl] calculate the 20% who are false negatives will, on average, pass the virus to 2.5 people. The other 80% of cases are caught on average halfway through the testing cycle.

To put it in basic maths terms, if we test people every “x” days, we catch those infections on average after half that time (x/2 days). To keep the effective reproduction rate at, say, 0.75 we need “x” to be 3.75. That means testing everyone roughly once every four days.

And that would mean testing more than 6.5 million Australians a day. Yikes!

50,000 Australians a day are being tested for COVID-19. How to solve the maths that says the number should be 6.5 million Door-to-door checks and testing being done in the northern Melbourne suburb of Broadmeadows on June 25 2020. Daniel Pockett/AAP

Asymptomatic cases

Given the scale needed to make random testing a success, it is perhaps not surprising authorities have opted for targeted testing – focusing on transmission hot spots.

But Siddarth and Weyl explain the fatal flaw with any testing strategy reacting only to symptomatic cases:

By the time symptomatic patients show up, they will already have infected .833 people. Furthermore, 20% of those infected will be asymptomatic throughout the time they have the disease, and 20% of those tested will yield false negatives. This means that a policy of only testing those who present with symptoms and only quarantining those who test positive will lead an average infected individual to infect others at a rate of 1.4.

Being above 1, this means the virus still grows exponentially.

Read more: Coronavirus: asymptomatic people can still develop lung damage

Testing with contact tracing

A better solution is to test based on rigorous contact tracing of known infections. This is why governments pinned such great hopes on the technology of tracing apps such as Australia’s COVIDSafe.

Siddarth and Weyl consider a kind of best-case scenario that traces everyone an infectious person has come into contact with, and everyone those people have come into contact with as well. They calculate this could lead to tracking down 75% of cases. Other transmission would be pursued through prompt testing of everyone with symptoms.

In the US this would require about 2 million tests a day. In Australia it would need about 150,000 tests a day – three times as many tests as are being done now.

Group testing

An intriguing solution is “group testing”. This idea has been around since the 1940s and involves pooling patient specimens for testing. If the pooled test is negative, the whole group is cleared. If the test is positive, more focused testing is done to identify individual cases.

Read more: Group testing for coronavirus – called pooled testing – could be the fastest and cheapest way to increase screening nationwide

The question, then, is what is the optimal group-testing strategy? For instance, what is the best group size to choose? Should some people be placed in multiple groups? Should there be multiple stages of group testing?

In a US National Bureau of Economic Research working paper published this month, four scholars from the University of California Berkeley show how machine learning can help to determine the optimal strategy.

For example, optimal group test size depends on the prevalence of the virus in the population. By estimating individual risk profiles – a person’s age, pre-existing health problems, where they live, if they work in a job that exposes them to risks, and so on – it is possible to target tests more efficiently than if treating everyone as equally at risk.

The goal is to improve predictive accuracy by incorporating as many observable characteristics that may influence risk as possible. This is a classic problem for “supervised machine learning”. Using machine learning could make group testing perhaps four to five times more efficient, the Berkeley researchers suggest.

Done this way, we might be able to achieve an effective strategy by testing as few as 30,000 to 40,000 Australians a day.

But the approach will need to be very different from now.

Our pre-vaccine future

Until an effective vaccine is found and widely deployed, testing is crucial to control COVID-19.

As the Berkeley authors emphasise, modern analytic techniques can make “high-frequency, intelligent group testing a powerful new tool in the fight against COVID-19, and potentially other infectious diseases”.

We need all the tools we can find.

Authors: Richard Holden, Professor of Economics, UNSW

Read more https://theconversation.com/vital-signs-50-000-australians-a-day-are-being-tested-for-covid-19-how-to-solve-the-maths-that-says-the-number-should-be-6-5-million-142255

Interstate Car Transporter Urges Buyers to Book Early

As the conflict in the Middle East continues to put increasing pressure on local fuel supply, Australian transport companies are experiencing increasi...

Digital Minimalism for Business Owners: Fewer Tools, Better Systems

Be honest. How many apps are open right now? One for scheduling, another for invoices, a third for customer notes, plus a spreadsheet someone email...

The Importance Of Proactive NDIS Renewal Preparation For Sustaining Your Provider Business

Your NDIS renewal notice is not a signal to start preparing. By the time it arrives, preparation should already be well underway. For new providers, s...

Why Fire Extinguisher Testing in Sydney Is Becoming a Records Game, Not Only a Maintenance Job

A fire extinguisher used to feel like one of the simpler parts of building safety. It hung on the wall, wore a service tag, and sat there quietly unle...

The Switchboard Upgrade Question Every Melbourne Renovator Should Ask Before the Walls Close Up

Renovations have a funny way of making people think on surfaces first. Splashback, stone, joinery, tapware, paint. Fair enough too. That is the exciti...

Winter Sanitation Gaps in Parramatta Kitchens: A Hidden Pest Risk

Winter brings a host of changes to our homes, from the chill in the air to the cozy warmth indoors. However, this season also introduces sanitation ch...

When to Seek Advice from Employment Lawyers in Melbourne

Australian employment law is detailed and, at times, complex, with rights and obligations that aren't always obvious to employees or employers witho...

7 Benefits of Professional Gutter Cleaning for Australian Homeowners

Gutters aren't exactly glamorous. They sit up there on the edge of your roof, doing their job quietly - until they stop working. Clogged, overflowing ...

Pipe Floats Strengthening Pipeline Performance In Demanding Environments

Pipelines often travel through environments that are anything but predictable, water currents shift, terrain changes, and materials keep moving unde...

Why Ceiling Fans Are Essential For Comfort, Efficiency, And Modern Living

Creating a comfortable indoor environment is not just about temperature; it is about how air moves, how a room feels, and how efficiently energy is ...

Why Duct Cleaning In Melbourne Is A Smart Investment For Healthier Living Spaces

Behind your walls, ceilings, and vents lies a network quietly working every day to keep your home comfortable. Yet over time, this system can become...

Disability Service Providers Supporting Inclusive And Independent Living

Finding the right support system can feel like assembling a puzzle where every piece must fit just right. For individuals and families navigating di...

A Beginner's Guide to Owning a Caravan in Australia

Owning a caravan opens up a style of travel that's hard to match for freedom and flexibility. However, for those just starting out, the process of c...

Preparing Your Air Conditioner for Summer: What Most Homeowners Overlook

As temperatures rise, many homeowners switch on their air conditioning for the first time in months — only to find it’s not performing the way i...

What Actually Adds Value to Properties in Newcastle

Newcastle has seen steady growth over the past few years, with more buyers looking beyond Sydney for lifestyle, space, and long-term value. As dema...

What is Design and Build in Construction?

Imagine you’re about to start a new construction project, maybe it’s a custom home or a commercial building. You’ve got the idea, the land, an...

Commercial roof leak detection: why early action protects your building

Water ingress is one of the most disruptive and costly issues facing commercial properties. For property managers and facilities teams, even a minor...

Custom Photo Frames: Turning Everyday Moments into Lasting Displays

Photos capture moments, but how you display them determines how they’re experienced every day. A meaningful photograph deserves more than a generi...