Google AI


Modern Australian

Labo(u)r easily wins in both New Zealand and the ACT, and leads in Queensland

  • Written by: Adrian Beaumont, Honorary Associate, School of Mathematics and Statistics, University of Melbourne
Labo(u)r easily wins in both New Zealand and the ACT, and leads in Queensland

At Saturday’s New Zealand election, Labour won 64 of the 120 seats (up 18 since the 2017 election). This means a Labour eight-seat majority. The opposition National won 35 seats (down 21), the right-wing ACT ten (up nine), the Greens ten (up two) and the Māori party one (up one).

Vote shares were 49.1% Labour (up 12.2%), 26.8% National (down 17.6%), 8.0% ACT (up 7.5%), 7.6% Greens (up 1.3%) and 1.0% Māori (down 0.2%).

Under New Zealand’s system, parties are entitled to a proportional allocation of seats if they either win at least 5% of the overall vote, or win a single-member seat. The Māori party entered parliament by winning one of the seven single-member seats reserved for those on the Māori roll. The Greens and ACT also won single-member seats.

Since the 2017 election, Labour has governed in coalition with the Greens and the populist NZ First. NZ First will not be returned to parliament, as their vote slumped to 2.7% (down 4.5%), and they failed to win a single-member seat.

This will be the first single-party New Zealand majority government since the adoption of proportional representation in 1996.

In February, two polls had National ahead of Labour. But Labour recorded massive poll leads in May owing to Prime Minister Jacinda Ardern’s handling of coronavirus. Labour’s lead narrowed somewhat as the election approached, but final polls understated Labour’s lead; they won by 22 points, not the 15 in final polls.

Greens could win six of 25 ACT seats

With 78% of enrolled voters counted at Saturday’s ACT election, vote shares were 38.4% Labor (down 0.1% since 2016), 33.1% Liberals (down 3.6%) and 13.9% Greens (up 3.6%).

The ACT uses five five-member electorates, with candidates elected using the Hare-Clark system. A quota is one-sixth of the vote, or 16.7%. Preference distribution sheets have been released based on votes cast electronically. Paper ballots will be manually entered.

In Brindabella, Labor has 2.5 quotas, the Liberals 2.3 and the Greens 0.7. The Poll Bludger’s analysis of preferences has it very close between Labor and the Greens for the final seat.

In Ginninderra, Labor has 2.4 quotas, the Liberals 1.6 and the Greens 0.8. Labor leads the Liberals for the final seat, but it could be overturned on late counting.

In Kurrajong, Labor has 2.3 quotas, the Liberals 1.6 and the Greens 1.4. Preferences from Labor and minor parties give the Greens a solid lead over the Liberals in the race for the final seat. So Kurrajong is likely to split two Labor, two Greens and just one Liberal.

In Murrumbidgee, Labor has 2.2 quotas, the Liberals 2.1 and the Greens 0.7. This is a clear two Labor, two Liberals, one Green result.

In Yerrabi, the Liberals have 2.4 quotas, Labor 2.1 and the Greens 0.6. This will be two Liberals, two Labor and one Green.

In summary, Labor is likely to win ten of the 25 seats, the Liberals eight and the Greens five, with two in doubt, one Labor vs Greens and one Labor vs Liberal. In 2016, the result was 12 Labor, 11 Liberals, two Greens. The current Labor/Green coalition has easily retained power.

Queensland Newspoll: 52-48 to Labor

The Queensland election will be held on October 31. A Newspoll, conducted October 9-14 from a sample of 1,001, gave Labor a 52-48 lead, a three-point gain for Labor since a late July Newspoll. Labor’s lead is the same as in a YouGov poll that I covered in early October. YouGov conducts Newspoll, so it is effectively the same pollster.

Primary votes were virtually identical to that YouGov poll, at 37% Labor, 37% LNP, 11% Greens and 9% One Nation; the only difference a one-point drop for the Greens.

63% were satisfied with Premier Annastacia Palaszczuk’s performance and 33% were dissatisfied, for a net approval of +30. These figures are identical to a September Newspoll of the Victorian and Queensland premiers’ ratings.

Opposition Leader Deb Frecklington had a net approval of -7, up one point since the late July Newspoll. Palaszczuk led Frecklington as better premier by 57-32 (57-26 in July).

More state polls: NSW and Victoria

Channel 10 commissioned a uComms NSW poll after revelations of Premier Gladys Berejiklian’s affair with former Liberal MP Daryl Maguire. 63% said Berejiklian should not resign, and just 28% thought she should go.

The only information provided on voting intentions was that the Coalition led Labor by 38-30. William Bowe says that uComms includes undecided in the initial table, and that this implies little change from the 2019 election result.

A YouGov poll for The Sunday Telegraph gave Berejiklian a 68-26 approval rating. By 49-36, voters did not think she had done anything wrong. By 60-29, they wanted her to stay as premier.

A Victorian SMS Morgan poll, conducted October 12-13 from a sample of 899, gave Labor a 51.5-48.5 lead, unchanged since late September. Primary votes were 40% Labor (up one), 40% Coalition (up 0.5) and 9% Greens (down one). Premier Daniel Andrews had a 59-41 approval rating (61-39 previously).

Trump still down by double digits nationally

The FiveThirtyEight national polls aggregate currently gives Joe Biden a 10.6% lead over Donald Trump (52.4% to 41.8%). It’s somewhat closer in the key states with Biden leading by 7.9% in Michigan, 7.8% in Wisconsin, 6.8% in Pennsylvania, 4.0% in Florida and 3.9% in Arizona.

Pennsylvania has returned to being the “tipping-point” state, and is currently polling 3.8% better for Trump than nationally. But Trump needs to get within five points to make the Electoral College competitive.

There appears to be a new surge of coronavirus in the US: over 70,000 new cases were recorded Friday, the highest since late July. Trump is perceived to have handled coronavirus poorly, so the more it is in the headlines, the worse it will probably get for him.

Authors: Adrian Beaumont, Honorary Associate, School of Mathematics and Statistics, University of Melbourne

Read more https://theconversation.com/labo-u-r-easily-wins-in-both-new-zealand-and-the-act-and-leads-in-queensland-147985

Understanding a dental implant Melbourne Treatment Plan

A dental implant Melbourne patients may consider is one option for replacing a missing tooth, but suitability depends on oral health, bone support a...

How 3PL Logistics Australia Supports Faster and More Efficient Supply Chains

Why Has 3PL Logistics Become Important for Growing Businesses?  Gone are the days when supply chains were simpler and in minimal quantity. Now, the...

Common Skin Concerns and Treatment Options Available in Melbourne

Skin concerns can develop gradually or become noticeable following changes in age, lifestyle, sun exposure or hormonal factors. Pigmentation, rednes...

Why a Code-Compliant Home Can Still Feel Uncomfortable

When people build or renovate a home, they usually expect that meeting current building requirements will also produce a comfortable place to live. ...

Breach of Contract in Business: What Are Your Options?

Contracts are essential to business relationships. They establish expectations, allocate responsibilities and provide a framework for delivering goods...

How Pest Control Companies Can Rank for the Problems Customers Search First

Introduction SEO for Pest Control needs to start with the customer’s problem. Most people do not search for pest services in a neat or technical wa...

What Are the Benefits of Renovating an Older Home in Sydney?

Sydney has plenty of character homes, from Federation cottages to mid-century brick homes. Renovating rather than rebuilding can preserve what makes t...

Pool and Deck Design: How to Plan the Perfect Outdoor Living Space for Your Sydney Home

For many Australians, the backyard is where life happens. Summer barbecues, weekend swims and long evenings outdoors are all part of the lifestyle, ...

Is Solar Pool Heating Worth It? What Sydney Homeowners Should Know

There's nothing quite like a backyard pool on a hot Sydney day. But once autumn rolls in, many pools sit unused for months because the water is simp...

Planning a Luxury House Move: A Week-by-Week Timeline for Prestige Sydney Homes

Selling or buying a prestige home is a major milestone. Whether it's a waterfront residence in Birchgrove, a grand Federation home in Haberfield or ...

Downsizing or Upgrading Your Caravan? Here's How to Sell It Without the Hassle

Selling a caravan can feel like a major task, especially when you are unsure about its value, paperwork, or how to find a buyer. Whether you are dow...

The Best Overseas Adventure Holidays for Australians Who Love the Outdoors

Australia offers no shortage of incredible outdoor experiences, but sometimes the best way to satisfy your sense of adventure is to head overseas. A...

Cape Town Wine Shuttle: Winelands Tasting & Tours

Embark on an unforgettable journey through the picturesque Cape Winelands, where world-class wines and breathtaking scenery await. Our Cape Town Win...

Metal Fabrication: Choosing Metal Fabrication Melbourne Services for Custom Projects

What Modern Metal Fabrication Involves From individual components to complete structures, metal fabrication brings together processes such as desig...

Why Giant Rats Tail Grass Keeps Coming Back After Spraying

Giant Rats Tail Grass (GRT) is one of the most frustrating pasture weeds for farmers and lifestyle property owners. You spray an infested area, see th...

When Custom Cardboard Boxes Make Sense for Your Business

Custom cardboard boxes can be useful when a standard carton does not fit a product, packing method or presentation requirement particularly well. A ...

Full-Height vs. Pop-Top Caravan: Which Is Better for Family Travel across WA?

A pop-top caravan is an excellent choice for travellers who want the comfort of a caravan without committing to a larger, bulkier setup. With a lowe...

Bottle Label Printing: Key Factors for a Professional Finish

Why the Printing Method Matters When businesses need packaging or printed containers developed for a particular application, the right supplier can m...