Google AI


Modern Australian

how do you fix a problem like PFAS?

  • Written by: Sarah Wilson, PhD Candidate in Quantum Technology & Innovation Governance, Institue for Sustainable Futures, University of Technology Sydney
how do you fix a problem like PFAS?

A landmark legal settlement has once again focused our attention on the dangers of “forever chemicals”.

This class of chemicals, technically known as per-and polyfluoroalkyl substances, or PFAS, are widely used to make nonstick or waterproof products. The problem is, the chemicals move easily around the environment, pollute groundwater and rivers, are often carcinogenic – and they don’t degrade.

This month, one of the largest makers of these chemicals, 3M, had its offer of A$16 billion to clean up PFAS-contaminated waterways approved by a US court. It’s just the latest in a series of PFAS lawsuits across the United States.

While increased attention is welcome, there’s no guarantee of success. Removing and destroying PFAS from wastewater streams across a single US state, Minnesota, would cost a minimum of $21 billion over 20 years. Globally, a recent report by the chemical safety nonprofit ChemSec found the costs of PFAS remediation alone amount to around $26 trillion per year – not including rising healthcare costs from exposure to PFAS, or damage to the environment. The 3M settlement is just the tip of the iceberg.

The problem now is how to actually clean up these chemicals – and prevent further pollution.

sign showing 3M logo
A US court this month approved 3M’s settlement offer to clean up waterways. Richard Drew/AP

Remediation is expensive – and uncertain

In Australia, contamination is worst in firefighter training grounds and on defence force bases, due to the long-term use of firefighting foams full of PFAS. The discovery of this contamination triggered a wave of lawsuits. The Department of Defence has since paid out more than $366 million in class action lawsuits.

Defence has also assumed responsibility for managing, remediating and monitoring PFAS contamination on and around its bases. In 2021, the department began to actively set about remediation.

Read more: Removing PFAS from public water systems will cost billions and take time – here are ways you can filter out harmful 'forever chemicals' at home

That sounds promising – find the pollution and fix the problem. But the reality is much more complicated.

A 2022 parliamentary inquiry described PFAS remediation as an emerging and experimental industry.

This is correct. There’s a great deal of basic scientific research we have to do. This is not a simple problem. These chemicals seep into the soil and groundwater – and stay there. It’s hard to get them out.

As a result, most remediation work at defence bases to date has been part of research and development, rather than a wide-scale permanent cleanup.

To help, the defence department has brought in three major industry partners, including Emerging Compounds Treatment Technologies. We don’t know how they are doing the cleanup or if their methods work, as this information is not publicly accessible. The three companies have sought intellectual property protection to support their technological advantage in the growing PFAS remediation market.

One of the companies, Venetia, told the parliamentary inquiry:

[there] are still significant gaps in knowledge in keys areas such as human health toxicology, PFAS behaviour in the environment and remediation of PFAS in soil and water

PFAS is a much bigger problem

Significant PFAS contamination has now been reported in:

– Melbourne’s West Gate Tunnel construction site. Soil contamination at the most polluted site is hundreds of times worse than a threshold set by the state’s environmental protection agency

– Western Australian mines

– WA waste management facilities

– Southeast Queensland water reclamation plants

– Perth’s public and private airports

– Operating and closed landfills.

The full extent of PFAS contamination in Australia is still emerging. Recent research has found Australia is one of several toxic hotspots for PFAS, relative to the rest of the world.

groundwater pipe Getting forever chemicals out of groundwater is going to be hard – but necessary. Mumemories/Shutterstock

Worse, current monitoring practices are likely to be underestimating how much PFAS is lingering in the environment, given we usually only track a handful of these chemicals – out of more than 16,000.

Experts have called for:

improved understanding of the range of PFAS embodied in consumer and industrial products […] to assess the environmental burden and develop mitigation measures

The more we look, the more alarming the picture appears. Emerging research has found PFAS in consumer products such as cosmetics, packaging, waterproofing, inks, pesticides, medical articles, polishes and paints, metal plating, pipes and cables, mechanical components, electronics, solar cells, textiles and carpets.

The size and complexity of PFAS contamination suggests we are in for a very long and expensive process to begin cleaning it up – especially given we are still making and using these chemicals.

Read more: Controversial ‘forever chemicals’ could be phased out in Australia under new restrictions. Here’s what you need to know

How should we respond?

To start addressing the problem, here are three important steps.

1. Introduce a “polluter pays” principle.

The introduction of this concept is what forced 3M to pay up in the US. Australia has yet to follow suit, which is why the public has been footing the bill. If we introduce this legal principle, manufacturers will have to take responsibility. This would make it much less attractive for companies to make polluting products – and shift the burden from taxpayers to the companies responsible. Australia’s government is considering pursuing similar legal action against 3M.

2. Set PFAS contamination standards in line with other OECD countries, or better.

Earlier this month, the US implemented the first legally enforceable national drinking water standards for five PFAS compounds and two PFAS mixtures. Australia’s current acceptable drinking water guidelines allow up to 140 times more PFAS in our water than these strict new US standards. In the US, these new standards are drawing new investment in remediation.

3. Take it seriously.

For years, many of us thought all you had to do to avoid PFAS was not to buy nonstick pans. But these chemicals are now everywhere. They’re highly persistent and don’t leave our bodies easily. Every single person on the planet is now likely to have detectable levels of PFAS in their blood. Reducing this dangerous chemical load is going to take a lot of work to clean up existing hotspots, stop further production, and prevent recirculation of PFAS in recycled products or in our food.

The 3M settlement is a good start. But it’s only a start. Tackling this problem is going to be hard, but necessary.

Read more: PFAS: how research is uncovering damaging effects of 'forever chemicals'

Authors: Sarah Wilson, PhD Candidate in Quantum Technology & Innovation Governance, Institue for Sustainable Futures, University of Technology Sydney

Read more https://theconversation.com/chemicals-forever-how-do-you-fix-a-problem-like-pfas-227771

Better Business Photos Without Misleading Customers: An Australian Guide

A timber dining set looks inviting against a sunny deck, with cushions, lanterns and enough chairs for the whole family. But imagine the retailer sell...

Understanding a dental implant Melbourne Treatment Plan

A dental implant Melbourne patients may consider is one option for replacing a missing tooth, but suitability depends on oral health, bone support a...

How 3PL Logistics Australia Supports Faster and More Efficient Supply Chains

Why Has 3PL Logistics Become Important for Growing Businesses?  Gone are the days when supply chains were simpler and in minimal quantity. Now, the...

Common Skin Concerns and Treatment Options Available in Melbourne

Skin concerns can develop gradually or become noticeable following changes in age, lifestyle, sun exposure or hormonal factors. Pigmentation, rednes...

Why a Code-Compliant Home Can Still Feel Uncomfortable

When people build or renovate a home, they usually expect that meeting current building requirements will also produce a comfortable place to live. ...

Breach of Contract in Business: What Are Your Options?

Contracts are essential to business relationships. They establish expectations, allocate responsibilities and provide a framework for delivering goods...

How Pest Control Companies Can Rank for the Problems Customers Search First

Introduction SEO for Pest Control needs to start with the customer’s problem. Most people do not search for pest services in a neat or technical wa...

What Are the Benefits of Renovating an Older Home in Sydney?

Sydney has plenty of character homes, from Federation cottages to mid-century brick homes. Renovating rather than rebuilding can preserve what makes t...

Pool and Deck Design: How to Plan the Perfect Outdoor Living Space for Your Sydney Home

For many Australians, the backyard is where life happens. Summer barbecues, weekend swims and long evenings outdoors are all part of the lifestyle, ...

Is Solar Pool Heating Worth It? What Sydney Homeowners Should Know

There's nothing quite like a backyard pool on a hot Sydney day. But once autumn rolls in, many pools sit unused for months because the water is simp...

Planning a Luxury House Move: A Week-by-Week Timeline for Prestige Sydney Homes

Selling or buying a prestige home is a major milestone. Whether it's a waterfront residence in Birchgrove, a grand Federation home in Haberfield or ...

Downsizing or Upgrading Your Caravan? Here's How to Sell It Without the Hassle

Selling a caravan can feel like a major task, especially when you are unsure about its value, paperwork, or how to find a buyer. Whether you are dow...

The Best Overseas Adventure Holidays for Australians Who Love the Outdoors

Australia offers no shortage of incredible outdoor experiences, but sometimes the best way to satisfy your sense of adventure is to head overseas. A...

Cape Town Wine Shuttle: Winelands Tasting & Tours

Embark on an unforgettable journey through the picturesque Cape Winelands, where world-class wines and breathtaking scenery await. Our Cape Town Win...

Metal Fabrication: Choosing Metal Fabrication Melbourne Services for Custom Projects

What Modern Metal Fabrication Involves From individual components to complete structures, metal fabrication brings together processes such as desig...

Why Giant Rats Tail Grass Keeps Coming Back After Spraying

Giant Rats Tail Grass (GRT) is one of the most frustrating pasture weeds for farmers and lifestyle property owners. You spray an infested area, see th...

When Custom Cardboard Boxes Make Sense for Your Business

Custom cardboard boxes can be useful when a standard carton does not fit a product, packing method or presentation requirement particularly well. A ...

Full-Height vs. Pop-Top Caravan: Which Is Better for Family Travel across WA?

A pop-top caravan is an excellent choice for travellers who want the comfort of a caravan without committing to a larger, bulkier setup. With a lowe...