Google AI


Modern Australian

Should we fight climate change by re-engineering life itself?

  • Written by: Jonathan Symons, Macquarie School of Social Sciences, Macquarie University
Should we fight climate change by re-engineering life itself?

Life has transformed our world over billions of years, turning a dead rock into the lush, fertile planet we know today. But human activity is currently transforming Earth again, this time by releasing greenhouse gases that are driving dramatic changes in our climate.

What if we could harness the power of living organisms to help rein in climate change? The field of “engineering biology”, which uses genetic technology to engineer biological tools for solving specific problems, may be able to help.

Perhaps the most dramatic success to date of this nascent field is the mRNA vaccines that helped us weather the COVID pandemic. But engineering biology has enormous potential not only to help us adapt to climate change, but also to limit warming.

In our latest paper in Nature Communications, we reviewed some of the many ways engineering biology can aid the fight against climate change – and how governments and policy makers can make sure humanity reaps the benefits of the technology.

Could engineering biology help fight climate change?

We identified four ways engineering biology might help to mitigate climate change.

The first is finding better ways to make synthetic fuels that can directly replace fossil fuels. Many existing synthetic fuels are made from high-value crops such as corn and soybeans that might otherwise be used for food, so the fuels are expensive.

Some engineering biology research explores ways to make synthetic fuel from agricultural waste. These fuels could be cheaper and greener, and so might help speed up decarbonisation.

For example, it would be much faster for airlines to decarbonise their existing fleets by switching to synthetic zero-carbon jet fuels, rather than waiting to replace their aircraft with yet-to-be-developed planes running on hydrogen or batteries.

Photo of a passenger jet against a cloudy sky.
Finding a way to make carbon-neutral jet fuel would be a faster way to decarbonise air travel than waiting for electric planes to be developed. Kevin Woblick / Unsplash

The second is developing cost-effective ways to capture greenhouse emissions (from industrial facilities, construction and agriculture) and then use this waste for “biomanufacturing” valuable products (such as industrial chemicals or biofuels).

The third is replacing emissions-intensive production methods. For example, several companies are already using “precision fermentation” to produce synthetic milk that avoids the dairy industry’s methane emissions. Other companies have produced microbes which promise to fix nitrogen in soil, and so help reduce use of fertilisers produced from fossil fuels.

Finally, the fourth is directly capturing greenhouse gases from the air. Bacteria engineered to consume atmospheric carbon, or plants bred to sequester more carbon in their roots, could in theory help reduce greenhouse gas levels in the atmosphere.

Beyond the technological and economic barriers, it’s unclear whether these ideas will ever gain a social license. Given the “science fiction-like” character of some of these emerging climate responses it’s essential that researchers be transparent and responsive to public attitudes.

Fact or science fiction?

Just how realistic are these ideas? Bringing a new product to market takes time, money and careful research.

Take solar power, for example. The first solar cell was created in the 1880s, and solar panels were installed on the White House roof in 1979, but it took many more decades of government support before solar power became a cost-competitive source of electricity.

Photo of an array of solar panels under a blue sky. It took decades of government support before solar panel technology became a viable competitor for fossil fuel electricity generation. Lincoln Electric Systems / Unsplash

The engineering biology sector is currently flooded with investor capital. However, the companies and projects attracting most investment are those with the greatest commercial value – typically in the medical, pharmaceutical, chemical and agricultural sectors.

By contrast, applications whose primary benefit is to reduce greenhouse emissions are unlikely to attract much private investment. For example, synthetic jet fuel is currently much more expensive than traditional jet fuel, so there’s no rush of private investors seeking to support its commercialisation.

Government (or philanthropic) support of some kind will be needed to nurture most climate-friendly applications through the slow process of development and commercialisation.

Back to picking winners?

Which engineering biology applications deserve governments’ assistance? Right now, it’s mostly too early to tell.

Policymakers will need to continually assess the social and technical merits of proposed engineering biology applications.

If engineering biology is to play a significant role in fighting climate change, policymakers will need to engage with it skilfully over time.

We argue government support should include five elements.

First, continued funding for the basic scientific research that generates new knowledge, and new potential mitigation tools.

Second, public deliberation on engineering biology applications. Some new products – such as precision-fermented synthetic milk – might gain acceptance over time even if they at first seem unattractive. Others might never gain support. For this public deliberation to reflect the interests of all humanity, low- and middle-income countries will need to gain expertise in engineering biology.

Photo of a glass and a bottle of milk on a bench. Synthetic milk, produced by fermentation with customised yeast, may be an emissions-friendly way of creating dairy products. Photoongraphy / Shutterstock

Third, regulations should be aligned with public interest. Governments should be alert to the possibility of existing industries trying to use regulations to lock out new competitors. For instance, we may see efforts from animal-based agricultural producers to restrict who can use words like “milk” and “sausage” or to ban lab-grown meat completely.

Fourth, support commercialisation and scale-up of promising technologies whose primary benefit is reducing greenhouse emissions. Governments might either fund this work directly or create other incentives – such as carbon pricing, tax credits or environmental regulations – that make private investment profitable.

Fifth, long-term procurement policies should be considered where large-scale deployment is needed to achieve climate goals. For example, the US Inflation Reduction Act provides unlimited tax credits to support direct air capture. While these incentives weren’t designed with engineering biology in mind, they are technologically neutral and so might well support it.

A bioengineered future in Australia?

Governments are now involved in a global race to position their countries as leaders in the emerging green economy. Australia’s proposed “future made in Australia” legislation is just one example.

Other governments have specific plans for engineering biology. For example, the United Kingdom committed £2 billion (A$3.8 billion) last year to an engineering biology strategy, while the US CHIPS and Science Act of 2022 called for the creation of a National Engineering Biology Research and Development Initiative.

If such interventions are to be economically and ecologically successful, they will need to work with still-developing technology.

Can policymakers work with this kind of uncertainty? One approach is to develop sophisticated assessments of the potential of different technologies and then invest in a diverse portfolio, knowing many of their bets will fail. Or, they might create technology-neutral instruments, such as tax credits and reverse auctions, and allow private industry to try to pick winners.

Engineering biology promises to contribute to a major step up in climate mitigation. Whether it lives up to this promise will depend on both public and policymakers’ support. Given just how high the stakes are, there’s work for all of us to do in reckoning with this technology’s potential.

Authors: Jonathan Symons, Macquarie School of Social Sciences, Macquarie University

Read more https://theconversation.com/should-we-fight-climate-change-by-re-engineering-life-itself-227995

Understanding a dental implant Melbourne Treatment Plan

A dental implant Melbourne patients may consider is one option for replacing a missing tooth, but suitability depends on oral health, bone support a...

How 3PL Logistics Australia Supports Faster and More Efficient Supply Chains

Why Has 3PL Logistics Become Important for Growing Businesses?  Gone are the days when supply chains were simpler and in minimal quantity. Now, the...

Common Skin Concerns and Treatment Options Available in Melbourne

Skin concerns can develop gradually or become noticeable following changes in age, lifestyle, sun exposure or hormonal factors. Pigmentation, rednes...

Why a Code-Compliant Home Can Still Feel Uncomfortable

When people build or renovate a home, they usually expect that meeting current building requirements will also produce a comfortable place to live. ...

Breach of Contract in Business: What Are Your Options?

Contracts are essential to business relationships. They establish expectations, allocate responsibilities and provide a framework for delivering goods...

How Pest Control Companies Can Rank for the Problems Customers Search First

Introduction SEO for Pest Control needs to start with the customer’s problem. Most people do not search for pest services in a neat or technical wa...

What Are the Benefits of Renovating an Older Home in Sydney?

Sydney has plenty of character homes, from Federation cottages to mid-century brick homes. Renovating rather than rebuilding can preserve what makes t...

Pool and Deck Design: How to Plan the Perfect Outdoor Living Space for Your Sydney Home

For many Australians, the backyard is where life happens. Summer barbecues, weekend swims and long evenings outdoors are all part of the lifestyle, ...

Is Solar Pool Heating Worth It? What Sydney Homeowners Should Know

There's nothing quite like a backyard pool on a hot Sydney day. But once autumn rolls in, many pools sit unused for months because the water is simp...

Planning a Luxury House Move: A Week-by-Week Timeline for Prestige Sydney Homes

Selling or buying a prestige home is a major milestone. Whether it's a waterfront residence in Birchgrove, a grand Federation home in Haberfield or ...

Downsizing or Upgrading Your Caravan? Here's How to Sell It Without the Hassle

Selling a caravan can feel like a major task, especially when you are unsure about its value, paperwork, or how to find a buyer. Whether you are dow...

The Best Overseas Adventure Holidays for Australians Who Love the Outdoors

Australia offers no shortage of incredible outdoor experiences, but sometimes the best way to satisfy your sense of adventure is to head overseas. A...

Cape Town Wine Shuttle: Winelands Tasting & Tours

Embark on an unforgettable journey through the picturesque Cape Winelands, where world-class wines and breathtaking scenery await. Our Cape Town Win...

Metal Fabrication: Choosing Metal Fabrication Melbourne Services for Custom Projects

What Modern Metal Fabrication Involves From individual components to complete structures, metal fabrication brings together processes such as desig...

Why Giant Rats Tail Grass Keeps Coming Back After Spraying

Giant Rats Tail Grass (GRT) is one of the most frustrating pasture weeds for farmers and lifestyle property owners. You spray an infested area, see th...

When Custom Cardboard Boxes Make Sense for Your Business

Custom cardboard boxes can be useful when a standard carton does not fit a product, packing method or presentation requirement particularly well. A ...

Full-Height vs. Pop-Top Caravan: Which Is Better for Family Travel across WA?

A pop-top caravan is an excellent choice for travellers who want the comfort of a caravan without committing to a larger, bulkier setup. With a lowe...

Bottle Label Printing: Key Factors for a Professional Finish

Why the Printing Method Matters When businesses need packaging or printed containers developed for a particular application, the right supplier can m...