Modern Australian
The Times

Design and repair must work together to undo our legacy of waste

  • Written by Tom Lee, Senior Lecturer, School of Design, University of Technology Sydney

This article is part of our occasional long read series Zoom Out, where authors explore key ideas in science and technology in the broader context of society and humanity.

“Design” has been one of the big words of the twentieth century. To say that an object has been designed implies a level of specialness. “Designer items” are invested with a particular kind of expertise that is likely to make them pleasing to use, stylish, or – less common in late-capitalist society – well made.

Due to this positive association, design has become an “elevator word”, to borrow a phrase used by philosopher of science Ian Hacking. Like the words “facts”, “truth”, “knowledge”, “reality”, “genuine” and “robust”, the word design is used to raise the level of discourse.

“Repair” hasn’t had such a glossy recent history. We don’t have universities or TAFEs offering degrees in repair, churning out increasingly large numbers of repairers. Repair exists in the shadow of design, in unfashionable, unofficial pockets. And, until recently, repair mostly passed unremarked.

British literary scholar Steven Connor points to the ambiguous status of repair in his analysis of “fixing”. Connor discusses fixing and fixers in the context of related figures, such as the tinker, bodger and mender, all of which share outsider status.

Read more: Why can't we fix our own electronic devices?

One might be forgiven for thinking “design” and “repair” were opposing forces. The former word has become so bound up with notions of newness, improvement, performance and innovation that it emphatically signals its difference from the seamful, restorative connotations of repair.

If repair is hessian and twine, design is sleek uniformity. Repair is about upkeep. Design is about updating. Repair is ongoing and cyclical. Design is about creative “genius” and finish. To design is, supposedly, to conceive and complete, to repair is to make do.

But perhaps design and repair are not, or ought not to be, as divergent as such a setting of the scene suggests. Thinking metaphorically of repair as design, and design as repair, can offer new and useful perspectives on both of these important spheres of cultural activity.

Repair and design have a lot in common

As a surface sheen that soothes us, design distracts us from any uncomfortable reminders of the disastrous excesses of global capitalist consumption and waste. The acquisition of new “designs” becomes addictive, a quick hit of a fresh design assures us that life is progressing.

As each new object is designed into existence and used over time, it is accompanied by an inevitable need for repair that evolves in parallel. Repair, where possible, cleans up the mess left by design.

Design and repair are different though related approaches to the common problem of entropy. Repair might seem only to be about returning an object to its previous state, whether for functional or decorative purposes. But maintaining that state is a hard fought affair, no less invested by collective or personal value.

The act of repair is also a determinate of worth. Whether at an individual or collective scale, choosing to repair this, and discard or neglect that, shares much in common with the process of selection, which informs the design of objects, images, garments or spaces.

Apple is revered for its design

Apple’s outgoing Chief Design Officer Jonathan Ive’s influence at Apple is among the most popularised examples of “successful design”, to which other designers and design students have long aspired. With Ive’s departure from Apple this year, we have an opportunity to take a long view of his legacy.

Since the distinctive bubble iMac in 1998, Ive shifted computing away from the beige, boxy uniformity of the IBM PC era, aligning computing with “high design” and investing it with deep popular appeal.

Even prior to Ive’s influence – take for example the 1977 Apple II – Apple’s industrial design has played a fundamental role in transforming computers from machines for tinkerers, into desirable objects of self-actualisation, blending leisure and labour with incomparable ease.

The iPhone is one among a suite of Apple products that have changed cultural expectations around consumer electronics, and other smart phone manufacturers have followed suit.

Read more: Understanding the real innovation behind the iPhone

The ubiquity of iPhones makes it increasingly difficult to appreciate their strangeness. Not only do they appear sealed beyond consumer access, they almost induce a forgetting of seals altogether. The glistening surface expresses an idea of inviolability which is completely at odds with the high likelihood of wear and tear.

Design and repair must work together to undo our legacy of waste The Apple iPhone Xs. Apple

The iPhone is perhaps the ultimate example of a “black box”, an object that exhibits a pronounced distinction between its interior mechanics, which determine its functionality, and its exterior appearance. It gives nothing away, merely reflecting back at us through its “black mirror”, to borrow the title of Charlie Brooker’s dystopian television series.

The design of the iPhone – among other similar devices – forecloses against repair, both through its physical form, and also through the obsolescence built into its software and systems design, which defensively pits individuals against the power of a giant multinational company.

‘Right to repair’ is gaining ground

Apple deliberately discourages its customers using independent repair services. It has a track record of punishing people who have opted for independent repairs, rather than going through Apple (at much greater expense). This is an example of the company’s attempt to keep its customers in an ongoing cycle of constant consumption.

This has put Apple – along with the agricultural equipment company John Deere – in the crosshairs of the growing Right to Repair movement in the United States. Right to Repair is centred on a drive to reform legislation in 20 US states, targeting manufacturers’ “unfair and deceptive policies that make it difficult, expensive, or impossible for you to repair the things you own”.

The movement could perhaps be criticised for focusing too much on libertarian individualism. Other groups advocate more community-focused repair strategies, such as the global proliferation of Repair Cafes, and Sweden’s groundbreaking secondhand mall, ReTuna Recycling Galleria.

Either way, there is agreement that something must be done to reduce the staggering amounts of e-waste we produce. In Australia alone, 485,000 tonnes of e-waste was generated in 2016/2017, and the annual rates are increasing.

This legacy of digital technology’s “anti-repairability” has been accepted as inevitable for some time, but the tide is turning. For example, the Victorian government has banned e-waste from landfill from July 1.

Designing for the future

Considering the increasing importance of responsible production and consumption, it is easily imaginable that, in a not too distant future, designers and design historians might point to the iPhone as naive, regressive and destructive. An example of design with thoroughly dated priorities, like the buildings in the Gothic revival style that provoked the ire of modernist architects.

Obscuring the wastage of valuable resources through sleek design could be decried as an outrageous excess, rather than celebrated for its “simiplicity”. With the benefit of hindsight, we might finally see that the iPhone was the opposite of minimalism.

Read more: Mending hearts: how a ‘repair economy’ creates a kinder, more caring community

Perhaps the revered objects of this imagined future will be launched by an entrepreneur who spruiks features and services associated with repair, rather than pacing the stage, championing an object because of its slimness, sleekness and speed. Hackability, ease of access, modularity, spare parts and durability might be touted as a product’s best features.

Alternatively, if the use of an object is decoupled from individual ownership, the responsibility for repair and waste might fall back on the producer. Perhaps “repair bins” will become a taken for granted feature of the urban landscape like curbside recycling bins are today.

To compel the pragmatists among us, such wishful thinking needs to remain mindful of the power multinationals have demonstrated in thwarting dreams of open access. Repair-oriented practices still face vast challenges when it is seemingly so convenient to waste. But to use one of the words of the day, aspirations need to be articulated if we, collectively, want to have the chance of living the dream.

Authors: Tom Lee, Senior Lecturer, School of Design, University of Technology Sydney

Read more http://theconversation.com/design-and-repair-must-work-together-to-undo-our-legacy-of-waste-119932

Why Retail CX Breaks During Peak Sales Events and How to Prevent It

Retail customer experience has become one of the most important drivers of revenue growth, especially during high-intensity sales periods. However, ev...

15 South Indian Dishes Everyone Should Try

If your only experience of "Indian food" is butter chicken and garlic naan, South Indian cuisine is going to feel like discovering an entirely new c...

What Every Homeowner Should Know About Roof and Drainage Maintenance

A home's roof and drainage system work together every day to protect the property from water damage. While many homeowners focus on visible areas such...

From Plans to Priced Quote: The Estimating Workflow Most Builders Skip

For a small one-off job, an experienced builder can size up the materials in their head. The problem is that most jobs are not small one-off jobs, and...

Organisational Experts Share Their Tips for Achieving a Clutter-Free Kitchen

They say the kitchen is the heart of a house which means a clutter-free kitchen not only makes your home in general look nicer, it also makes cookin...

10 Creative Ways AI Image Extenders Are Transforming Digital Content Creation in 2026

Introduction Artificial intelligence continues to reshape the digital landscape, and one of the most exciting innovations in 2026 is the rise of AI i...

What to Do When You're Arrested in Victoria

Most people have thought about this in the abstract. A knock at the door, a hand on the shoulder, a car pulled over on the Hume. In the abstract, th...

Common Financial Disputes During Separation

Separation hits on many levels, not just emotionally. When a partnership ends, untangling the financial side — assets, debts, and everything built t...

Why Posting More Content is Killing Your Brand

More content. More often. More platforms.Most brands have been running this playbook for three years. Most brands have nothing to show for it.Not be...

Garden Clean-Up vs. Regular Maintenance: Which Do You Really Need?

Most people ring a gardener and ask for a "tidy up." What they mean by that, and what the garden actually needs, are often two completely different ...

Solar Panel Maintenance Tips for Melbourne Homes

Three years in and the panels are still on the roof. The inverter is still blinking. The electricity bills are still lower than they used to be, rou...

Cost Effective Kitchen Renovations – From the Ground Up

Even in times of uncertainty, it seems renovations continue to be on the to-do list for many Australian property owners. As a result, demand on materi...

Why Bathroom Product Selection Matters More Than Most Homeowners Realise

Most homeowners think wrong when it comes to a bathroom renovation. They think hard about the layout. Spend hours choosing tiles. Agonise over pain...

How An Asbestos Removalist Ensures Safe And Compliant Property Environments in Melbourne

Maintaining a safe environment within residential and commercial properties requires careful management of hazardous materials, which is why engaging ...

Why Protein Bars Are A Convenient Option For Daily Nutrition And Energy

Maintaining balanced nutrition throughout the day can be challenging, especially for individuals with busy schedules, which is why protein bars hav...

Property Settlements After Separation: Key Considerations

Dividing assets after a separation is one of the more complex and emotionally charged aspects of the process. Understanding how property settlements...

Why Dust Control Matters During Bathroom Demolition

People usually expect bathroom demolition to be noisy.  No one thinks of dust — but it turns up everywhere. Inside cupboards. On couches. Along...

Why Roller Shutters And Outdoor Blinds Are Popular For Modern Properties

Many homeowners and businesses now install roller shutters to improve security, privacy, insulation, and weather protection across residential and ...