Google AI


Modern Australian

HEIDELBERG sees sequential improvement in business performance in a challenging geopolitical environment

  • Incoming orders high in second quarter of financial year 2026/2027 and around 3 percent higher after six months compared with equivalent period of previous year
  • Sequential increase in sales and EBITDA margin during financial year
  • Focus on strategic priorities – integration of manroland sheetfed proceeding according to plan
  • Geopolitical crises and advance outlay hit profitability
  • Forecast for financial year 2026/2027 – stable sales and adjusted EBITDA margin of between 5.6 and 6.6 percent

HEIDELBERG, GERMANY - Newsaktuell – 12 November 2026 – Heidelberger Druckmaschinen AG (HEIDELBERG) has seen sequential improvement in its business performance in a geopolitical environment that remains challenging.

In the second quarter of financial year 2026/2027 (July 1 to September 30, 2026), incoming orders improved further to € 604 million and were up on the second quarter of the previous year (€ 551 million). Incoming orders after six months amounted to € 1,141 million, which was slightly above the level for the equivalent period of the previous year (€ 1,111 million). Orders increased in all regions in the second quarter. Sales for the first six months of financial year 2026/2027 totaled € 913 million, which was down on the corresponding period of the previous year (€ 985 million). The sales figure of € 509 million for the second quarter of financial year 2026/2027 was roughly the same as the previous year (€ 519 million). Thanks to the healthy order situation and higher incoming orders, the company is expecting its sales and result figures in the second half of the current financial year to be significantly higher than in the first half-year.

At its new site in Egypt, packaging manufacturer UFlex ASEPTO has taken two highly productive Boardmaster systems from HEIDELBERG into operation for the production of aseptic packaging.
At its new site in Egypt, packaging manufacturer UFlex ASEPTO has taken two highly productive Boardmaster systems from HEIDELBERG into operation for the production of aseptic packaging.

In the second quarter, the adjusted EBITDA margin was up on the previous quarter at 6.4 percent. The half-year figure was 3.7 percent (equivalent period of previous year: 6.4 percent), which was mainly due to the lower volume of sales and negative product-mix effects. The macroeconomic situation also worsened, especially in the Middle East, which affected investment behavior. The ramp-up of projects in the HEIDELBERG Technology segment was delayed, too. The net result after taxes for the first half-year was slightly negative at € -9 million (previous year € 0 million). The figure of € 24 million for the second quarter was double the level recorded in the corresponding quarter of the previous year (€ 11 million). This was attributable to a gain recognized in net income from the acquisition of manroland sheetfed.

"Demand for our products and services remains high, which is reflected in rising incoming orders thanks to our strong market position," reveals Jürgen Otto, CEO of HEIDELBERG. "Our profitability is being hit by the continuing market volatility and high cost pressures, and by temporary project-related expenses. We are meeting our sales target despite a difficult market environment, and our strategic measures and acquisitions will help restore our profitability," he adds.

Primarily due to the increase in net working capital during the financial year, the free cash flow after the first six months was € -125 million (corresponding period of previous year: € -64 million). The shareholder's equity of the HEIDELBERG Group was € 596 million on September 30, 2026. This was higher than the figure of € 568 million recorded at the end of the previous financial year on March 31, 2026.

Christoph Burkhard has been the new CFO of Heidelberger Druckmaschinen AG since October 1, 2026.
Christoph Burkhard has been the new CFO of Heidelberger Druckmaschinen AG since October 1, 2026.

"The main factor influencing the free cash flow in the first half-year was the increase in net working capital," explains HEIDELBERG CFO Christoph Burkhard. "HEIDELBERG has a solid financial structure and the necessary stability to systematically invest in line with its strategy, despite a challenging market environment," he emphasizes.

Focus on strategic priorities

In the HEIDELBERG Technology segment, activities in the areas of electromobility (Amperfied) and energy systems made a particular contribution to boosting incoming orders and sales in the first six months of the financial year. Initial orders were also generated from drone defense systems business in the ONBERG joint venture. Due to advance outlay for planned growth, adjusted EBITDA in this segment remained negative (€ -9 million).

Globally strong market position in core business – integration of manroland sheetfed proceeding according to plan

In the Digital Solutions & Lifecycle segment, incoming orders and sales for the first half-year were also up on the previous year. In the Print & Packaging Equipment segment, incoming orders after six months were below the previous year's level. Incoming orders in the second quarter were around 8 percent higher than the previous year.

Global integration of the lifecycle and service business of manroland sheetfed into the HEIDELBERG organization is going according to plan and generated initial orders and sales in the second quarter. Access to over 3,000 new customers and the possible addition of large-format solutions to the portfolio are helping to strengthen the market position of HEIDELBERG. The company is confident it will have completed the integration of manroland sheetfed by the end of 2028 and further expanded its own business thanks to the customers acquired.

"A major packaging order from Egypt has confirmed the Boardmaster is highly relevant for high-performance applications. The investments our customer UFlex ASEPTO has made in an international growth market demonstrate that we can benefit from the structural trends in the packaging sector," says Dr. David Schmedding, Chief Technology & Sales Officer at HEIDELBERG. "Our new label printing press specifically for the Indian market underlines our commitment to playing a key role in India's label and packaging market," he adds.

Forecast for financial year 2026/2027 – stable sales and adjusted EBITDA margin of between 5.6 and 6.6 percent

As already announced on October 29, HEIDELBERG has adjusted its results forecast for financial year 2026/2027. The company is now expecting an adjusted EBITDA margin of between 5.6 and 6.6 percent for the current financial year. The sales forecast for financial year 2026/2027 remains unchanged and is based on the assumption that Group sales will remain stable compared with the previous year's level of € 2,293 million.

Image material and further information about the company are available in the Investor Relations portal and Press Lounge of Heidelberger Druckmaschinen AG at www.heidelberg.com.

Important Notice:

This press release contains forward-looking statements based on assumptions and estimates made by the management of Heidelberger Druckmaschinen Aktiengesellschaft. Although management believes these assumptions and estimates to be accurate, actual future developments and results may differ significantly from these assumptions and estimates due to a variety of factors. These factors may include, for example, changes in the general economic situation, exchange rates, and interest rates, as well as changes within the graphic arts industry. Heidelberger Druckmaschinen Aktiengesellschaft assumes no warranty or liability that future developments and actual results achieved will correspond to the assumptions and estimates expressed in this press release.
Hashtag: #Heidelberg

The issuer is solely responsible for the content of this announcement.

About HEIDELBERG

Heidelberger Druckmaschinen AG (HEIDELBERG) is a leading technology company that has stood for innovation, quality, and reliability in mechanical engineering worldwide for more than 175 years. With a clear focus on growth, HEIDELBERG, as a full-service provider and system integrator, drives further development in its core areas of packaging and digital printing, software solutions, and the lifecycle business with service and consumables, enabling customers to achieve maximum productivity and efficiency.

Building on decades of industry and systems expertise, the company is also strategically tapping into new markets in the fields of security, energy, charging infrastructure, and industrial system solutions—with clear scaling capabilities and attractive growth prospects. Thanks to a strong international presence in approximately 170 countries, the creativity and expertise of its roughly 9,500 employees, its own production facilities in Europe, China, and the U.S., and one of the largest global sales and service networks, the company is well positioned globally.

Better Business Photos Without Misleading Customers: An Australian Guide

A timber dining set looks inviting against a sunny deck, with cushions, lanterns and enough chairs for the whole family. But imagine the retailer sell...

Understanding a dental implant Melbourne Treatment Plan

A dental implant Melbourne patients may consider is one option for replacing a missing tooth, but suitability depends on oral health, bone support a...

How 3PL Logistics Australia Supports Faster and More Efficient Supply Chains

Why Has 3PL Logistics Become Important for Growing Businesses?  Gone are the days when supply chains were simpler and in minimal quantity. Now, the...

Common Skin Concerns and Treatment Options Available in Melbourne

Skin concerns can develop gradually or become noticeable following changes in age, lifestyle, sun exposure or hormonal factors. Pigmentation, rednes...

Why a Code-Compliant Home Can Still Feel Uncomfortable

When people build or renovate a home, they usually expect that meeting current building requirements will also produce a comfortable place to live. ...

Breach of Contract in Business: What Are Your Options?

Contracts are essential to business relationships. They establish expectations, allocate responsibilities and provide a framework for delivering goods...

How Pest Control Companies Can Rank for the Problems Customers Search First

Introduction SEO for Pest Control needs to start with the customer’s problem. Most people do not search for pest services in a neat or technical wa...

What Are the Benefits of Renovating an Older Home in Sydney?

Sydney has plenty of character homes, from Federation cottages to mid-century brick homes. Renovating rather than rebuilding can preserve what makes t...

Pool and Deck Design: How to Plan the Perfect Outdoor Living Space for Your Sydney Home

For many Australians, the backyard is where life happens. Summer barbecues, weekend swims and long evenings outdoors are all part of the lifestyle, ...

Is Solar Pool Heating Worth It? What Sydney Homeowners Should Know

There's nothing quite like a backyard pool on a hot Sydney day. But once autumn rolls in, many pools sit unused for months because the water is simp...

Planning a Luxury House Move: A Week-by-Week Timeline for Prestige Sydney Homes

Selling or buying a prestige home is a major milestone. Whether it's a waterfront residence in Birchgrove, a grand Federation home in Haberfield or ...

Downsizing or Upgrading Your Caravan? Here's How to Sell It Without the Hassle

Selling a caravan can feel like a major task, especially when you are unsure about its value, paperwork, or how to find a buyer. Whether you are dow...

The Best Overseas Adventure Holidays for Australians Who Love the Outdoors

Australia offers no shortage of incredible outdoor experiences, but sometimes the best way to satisfy your sense of adventure is to head overseas. A...

Cape Town Wine Shuttle: Winelands Tasting & Tours

Embark on an unforgettable journey through the picturesque Cape Winelands, where world-class wines and breathtaking scenery await. Our Cape Town Win...

Metal Fabrication: Choosing Metal Fabrication Melbourne Services for Custom Projects

What Modern Metal Fabrication Involves From individual components to complete structures, metal fabrication brings together processes such as desig...

Why Giant Rats Tail Grass Keeps Coming Back After Spraying

Giant Rats Tail Grass (GRT) is one of the most frustrating pasture weeds for farmers and lifestyle property owners. You spray an infested area, see th...

When Custom Cardboard Boxes Make Sense for Your Business

Custom cardboard boxes can be useful when a standard carton does not fit a product, packing method or presentation requirement particularly well. A ...

Full-Height vs. Pop-Top Caravan: Which Is Better for Family Travel across WA?

A pop-top caravan is an excellent choice for travellers who want the comfort of a caravan without committing to a larger, bulkier setup. With a lowe...