The Fire Safety Checklist Every Australian Short-Stay Host Should Run

Picture an Airbnb guest arriving late, tired, in a place they’ve never been. They don’t know where the exits are, which door leads to the garage, or how far the bedroom is from the street. If a fire starts at 2 am, the smoke alarm is the only warning they get, and getting out safely shouldn’t be a guess.
That’s the thinking behind short-stay fire rules. Whether you list on Airbnb, Stayz, Vrbo, or Booking.com, guest safety is paramount. You don’t need to be a fire engineer to get this right, and this isn’t a lecture. Here is a practical, no-nonsense fire safety checklist for short-stay hosts, starting with the state that has the clearest rules.
1. The Rules Depend on Where You Host
New South Wales has a dedicated Short Term Rental Accommodation Fire Safety Standard. Its stated aim is guest safety, recognizing that visitors are less familiar with a property than a permanent resident. It splits properties into houses (Class 1a) and apartments or units (Class 2 and Class 4), with slightly different requirements for each.
If you host outside NSW, don’t assume the same rules apply. Regulations vary by state and sometimes by local council (for example, Queensland has its own strict, phased smoke alarm deadlines leading up to 2027). Always verify with your state fire authority and local council.
Note: This guide highlights the NSW standard as a benchmark. Anything flagged as "good practice" goes beyond the minimum legal requirement. This is general information, not formal legal advice.
2. Smoke Alarms: Your First Line of Defense
Under the NSW standard, smoke alarms must be installed in the hallway or area between the bedrooms and the rest of the dwelling, and on every other storey. They must:
-
Be placed on or near the ceiling.
-
Comply with AS3786:2014.
-
Be powered by the mains or by a non-removable battery with a life of at least 10 years.
-
Be interconnected, so when one sounds, they all do.
Good Practice: The standard doesn’t require an alarm in each bedroom, but it’s a cheap and vital upgrade. A guest asleep behind a closed door will hear a bedroom alarm well before a hallway one.
If you're retrofitting an existing holiday let and want to avoid pulling cables through the ceiling, wireless interconnected smoke alarms link to each other seamlessly without new wiring. Always confirm your final setup with a licensed electrician or the NSW planning portal.
3. Kitchen: Fire Blanket and Extinguisher
For apartments and units (Class 2 and Class 4), the NSW standard requires a 2.5 kg ABE fire extinguisher and a fire blanket in an accessible kitchen location.
While houses aren’t strictly required to have both under this standard, a fire blanket costs very little, takes seconds to use and gives a guest who's never cooked in your kitchen a simple way to smother a pan fire.
Wherever you put them, make them easy to see and easy to reach. A fire blanket buried in a drawer full of tea towels won't help anyone. If you're unsure which standard applies to the blanket itself, check before you name one in your listing. The NSW standard references AS 2444 for where the blanket goes.
4. Attached Garage: Heat Alarm
NSW houses (Class 1a) with an attached private garage need a Class A1 or A2 heat alarm (AS 1603.3) in the garage, interconnected to the smoke alarms in the dwelling. Durable notices also need to be fixed in the dwelling and the garage indicating this. Check clause 4.1.2 of the standard for the exact wording on which garages are covered.
5. The Evacuation Diagram
Guests don't know your floor plan, so give them one. In NSW, an evacuation diagram must be fixed on or beside the entrance door, and in each bedroom on or beside the bedroom door. The standard sets out what each one needs:
-
A4 size or larger
-
Mounted between 1200mm and 1600mm above the floor
-
The title EVACUATION DIAGRAM and a clear YOU ARE HERE marker
-
A date of issue
-
The emergency number 000
-
A prompt to download the Emergency+ app
Check clauses 4.2.2 and 5.5.2 for the full list. Keep the diagram simple. Show the exits, the route out of each room and the meeting point outside. Update it whenever you move walls or furniture that changes the escape route.
The Host Changeover Checklist
Screenshot this one for your next property inspection:
☐ Smoke alarms in the hallway or sleeping area and on every other storey
☐ Alarms interconnected, and tested after any change to the setup
☐ Good practice: an alarm in each bedroom
☐ Kitchen: fire extinguisher and fire blanket visibly mounted (required in NSW apartments, sensible in houses)
☐ Attached garage: interconnected heat alarm and notices (NSW houses)
☐ Evacuation diagram at the entrance door and in each bedroom
☐ A regular test routine, with the date logged in your property management app.
Check your state and council
The NSW Short Term Rental Accommodation Fire Safety Standard (published by NSW Planning) is the perfect place to start if you host in New South Wales. Everywhere else, check with your state fire authority and local council, and keep in mind that insurance, planning and tax questions need advice from the right professional. Get the basics right in your short-stay property and your guests will never notice them, which is exactly the point.



















