Modern Australian
Times Advertising

Environmental footprint calculators have one big flaw we need to talk about

  • Written by Aaron Simmons, Adjunct Senior Research Fellow, University of New England
Environmental footprint calculators have one big flaw we need to talk about

Are you one of the increasingly large number of people seeking to minimise the environmental damage wrought when producing the food you eat? If so, you might use the common “environmental footprint” method to decide what to buy.

Environmental footprints measure the environmental damage caused by a product throughout its life. For food, this includes the impacts of growing crops and livestock, and manufacturing the inputs required such as fertilisers. It can also include packaging and transport.

But unfortunately, environmental footprints often don’t tell the full story. When consumers switch to a food seen as more environmentally friendly, its production expands at the expense of other products. This has consequences that environmental footprints don’t take into account.

Environmental footprint calculators may promise to help consumers lead a greener life. But they may in fact encourage choices that don’t benefit – and may even harm – the environment.

Man reaches for item in supermarket
Footprint calculators may encourage choices that don’t necessarily benefit the environment. Neil Hall/EPA

A problematic assumption

We are experts in assessing the effectiveness of climate change mitigation for agricultural systems. We regularly provide policy advice to governments, United Nations bodies and other organisations.

The design of environmental footprint calculators is guided by international standards organisations and policymakers, including the European Union. The tool is commonly found on the websites of environmental groups, government agencies, companies and other organisations.

The calculators aim to guide consumer choice, by assessing the impacts of current production on the environment. But this is a problem.

It assumes the footprint of a product calculated today remains constant as production is scaled up or down, but this often doesn’t hold true. When demand for a product changes, this has knock-on effects on nature. It might mean more agricultural land is required, or river water is used to irrigate different crops.

Below, we examine three ways environmental footprints can provide a misleading picture of a product’s true impacts.

1. Land use

Agriculture makes a large contribution to greenhouse gas emissions – primarily due to animal belches but also the production and use of synthetic fertilisers.

Organic farming can help reduce agriculture emissions, primarily because it doesn’t use synthetic fertiliser. But some research suggests converting to organic farming production could also exacerbate greenhouse gas emissions.

tractor ploughs field
Some research suggests converting to organic farming production could also exacerbate greenhouse gas emissions. Shutterstock

One study in England and Wales examined what would happen if all food production was converted to organic. It found global greenhouse gas emissions from food production could increase by about 60%.

This was because organic systems produce lower yields, meaning more crop and livestock production would be needed overseas to make up the shortfall. Creating this agricultural land would mean clearing vegetation, which emits carbon dioxide when it decomposes.

And when grasslands are converted to cropland, soil organic carbon is also lost. Enhanced soil carbon storage from organic farming offsets only a small part of the higher overseas emissions.

When considering the consequences of switching from one food to another, the type of agricultural land used is also important.

Read more: Meat and masculinity: why some men just can't stomach plant-based food

In Australia, about 325 million hectares of land is used to raise cattle to produce red meat. This land often can’t be used to grow crops because it’s too dry, steep, vegetated or rocky.

If consumers switch from red meat to plant-based diets, more land suitable for growing crops would be needed, either in Australia or overseas, to produce alternative proteins such as legumes or plant-based meats.

In Australia, existing arable land is already being used to supply crops to domestic and global markets. So new land would have to be made suitable for crops, either by cultivating grazing land or clearing forest. Alternatively, crop production could be increased by using more fertiliser or other inputs.

The emissions associated with these shifts are not included in carbon footprints of plant-based protein production.

cows grazing in field
Around 325 million hectares of land in Australia is used to raise cattle for meat. Rick Rycroft/AP

2. Water

It’s commonly assumed that choosing a product with a smaller water footprint will increase the water in rivers and lakes which replenishes the environment. However, in Australia, policy and markets determine how water is used.

Irrigation water can be traded between users. If a water-intensive crop such as rice is no longer grown, the farmer will almost always either use the water to grow a different crop or trade it with another farmer. In such a scenario, no water is returned to the environment.

Similarly, a fall in red meat production may not necessarily increase water for the environment.

Farmers whose land adjoins a river or other water body are allowed to take water for livestock to drink. Fewer livestock would leave more water available in rivers, but research in Australia suggests this water would be extracted for domestic uses, especially in dry years.

3. Goods produced together

Many agricultural products are produced in conjunction with others. For example, a cow slaughtered for red meat will also produce hide, meat meal and tallow. Likewise, a sheep can produce wool when alive, then other products when slaughtered.

So if consumers eschewed red meat due to its high carbon footprint, the associated products would also need to be replaced – and this would have environmental impacts.

If synthetic materials replace wool or hides, for example, demand for oil will likely increase. Or if wool is replaced with bio-based products such as cotton or hemp, demand for cropland will increase.

pile of handbags
A switch from hide to synthetic materials would likely increase oil demand. Shutterstock

Increasing milk production per cow – and thus keeping fewer cows – has been considered as a way to reduce livestock emissions. But research suggests it may not have the intended result.

Fewer cows would produce fewer calves, which are used to produce veal. The research found less veal would require more red meat to be produced elsewhere, meaning no overall reduction in emissions.

It is realistic to assume that more red meat would be required. While per capita beef consumption is declining in some Western countries, global demand for beef is projected to increase to 2030 as wealth in developing countries increases and global population grows.

Towards a healthier planet

We and other experts are increasingly trying to raise awareness of the simplistic nature of environmental footprints.

It’s important to recognise the limitations of current methods and create tools that fully assess the consequences of consumers’ decisions.

Developing these tools will be challenging, due to the many uncertainties involved, and will require substantial research investment.

But it will lead to better environmental policy, fewer unintended consequences and a healthier planet.

Read more: Don't drink milk? Here's how to get enough calcium and other nutrients

Authors: Aaron Simmons, Adjunct Senior Research Fellow, University of New England

Read more https://theconversation.com/environmental-footprint-calculators-have-one-big-flaw-we-need-to-talk-about-166897

What to Know Before Getting Dental Implants: A Guide for First-Time Patients

Dental implants Perth patients often look for a long-term solution for missing teeth without the hassle of dentures or bridges. If you are thinking ...

Why Protective Packaging Matters More Than Ever In Modern Shipping

In today’s fast-paced world of logistics and eCommerce, ensuring that products reach customers safely is a top priority. This is where a bubble wrap...

Pest Control Albury: Protecting Your Property From Hidden Damage And Health Risks

Pests rarely announce their arrival. They creep into spaces quietly, turning small, unnoticed corners into breeding grounds for bigger problems. Tha...

Why Root Canal Treatment Melbourne Is Essential For Saving Natural Teeth

Tooth pain has a way of demanding attention at the worst possible time. When the discomfort becomes persistent and intense, it often signals an infe...

How Bird Flight Diverters Help Protect Wildlife Around Power Infrastructure

Power infrastructure plays an essential role in modern life, but it can also create risks for wildlife, particularly birds moving through establishe...

What Businesses Should Look for in a Commercial Coffee Partner

Choosing a commercial coffee partner is not the same as choosing a machine. It is a broader decision that affects beverage quality, staff efficiency...

3PL Logistics Australia Driving Smarter Supply Chains And Faster Deliveries

In a world where customers expect speed almost as much as quality, logistics has become the silent heartbeat of every successful business. Behind th...

Why Professional Electrical Services Are Essential For Modern Properties

Electricity powers almost every aspect of daily life, from lighting and appliances to complex systems in homes and businesses. This makes choosing a...

What Not to Pack When Moving: The Essential Guide to Smart Packing

Moving house is one of those all-encompassing events in life and most people focus their energy on deciding what to pack. But knowing what not to pa...

From Assistance to Independence: Progression in Daily Living Skills

The ultimate goal of many support systems is to empower individuals to lead lives defined by autonomy and self-reliance. While some support requiremen...

The Cost Difference Between Early Repairs and Delayed Replacement

Automotive maintenance often involves a choice between addressing a small issue immediately or waiting until a component fails completely. When it c...

What Is a Stainless Steel Bar? Applications, Benefits, and Buying Tips

Stainless steel is one of the most widely used materials across industrial and commercial sectors, known for its strength, corrosion resistance, and...

Scholars in Developing Nations Depending on Z library

Access to books often shapes the course of study for scholars who live in regions with thin library shelves and slow supply chains. Many students wo...

6 Cheapest POS Systems in Australia (2026)

The cheapest POS systems in Australia for 2026 are POSApt, Square, Zeller, Loyverse, Epos Now, and Shopify POS (Lite). However, “cheap” does no...

The Ultimate Guide to Automating Your Weekend Yard Chores

We all look forward to the weekend as a chance to unwind after a long week of work. You probably picture yourself relaxing on the patio with a cold ...

How Ignoring Regular Car Servicing Can Lead to Costly Repairs

Owning a car gives you a sweet sense of freedom and comfort. You can go wherever you want, whenever you want. But with that freedom comes responsibili...

Someone Trips at Your Fundraiser. Now What? Understanding Public Liability for NFPs

Three months of planning. Volunteers giving up their weekends. Sponsorships chased, catering sorted, tables decorated. And then, about an hour into ...

Stainless Steel Tube: A Complete Specification Guide for Engineers, Project Managers, and Industrial Buyers

Few materials in the industrial and manufacturing world are as universally relied upon — or as frequently misspecified — as stainless steel tube...