Modern Australian
Men's Weekly

.

Our cities fall short on sustainability, but planning innovations offer local solutions

  • Written by Sebastien Darchen, Senior Lecturer in Planning, The University of Queensland

Thirty years after the landmark Brundtland report, the debate on urban sustainability continues. Urban planners are still grappling with the challenges of making our cities sustainable.

Urban sustainability is an evolving concept. Our edited volume provides planning solutions for eight of the 17 UN Sustainable Development Goals. Has the concept of urban sustainability made a difference in planning practice? Our answer is yes.

Read more: Business as usual? The Sustainable Development Goals apply to Australian cities too

Based on Campbell’s planner’s triangle, urban sustainability encompasses three dimensions:

  1. social sustainability
  2. environmental sustainability
  3. economic sustainability.

Sustainability solutions involve trade-offs between these three dimensions. A planning innovation might solve a challenge in terms of social sustainability but be less efficient in regard to the two other dimensions.

The Sustainable City paradigm has been a dominant school of thought since the 1990s. Yet it is still unclear how cities incorporate this paradigm in urban policies.

Influential works on urban policies have emphasised the transfer of urban policies from one context to another – known as mobile urbanism. Our book highlights evidence to the contrary. Planning innovations are generally shaped by local contextual factors and are not imported.

Of the planning innovations presented in 12 case study chapters in our book, we present those most relevant to Australia later in this article.

Key issues facing Australian cities

Australian cities have urgent sustainability issues that require fresh policy initiatives.

Transport use is too reliant on cars. As a result, fossil fuel use and greenhouse gas emissions remain far too high. Large areas of land are given over to road space and parking.

Read more: Driverless vehicles could bring out the best – or worst – in our cities by transforming land use

Read more: Freeing up the huge areas set aside for parking can transform our cities

High car use goes hand in hand with low-density urban sprawl. This requires longer trips to everything, extra resources for longer pipes, wires and roads, more losses of agricultural land and natural vegetation, and more hard surfaces that increase water pollution run-off as well as heat in summer.

And the design of low-density development produces even more unsustainability. Planning controls have forced developers to reduce the size of new housing lots, but house sizes have barely reduced in size. As a result, backyards are disappearing. Lost along with them are trees to cool the air and sequester carbon, and physical activity opportunities for children.

Read more: Size does matter: Australia's addiction to big houses is blowing the energy budget

Australia’s cities also have major social sustainability issues. Increasing numbers of professional and managerial households have priced poorer residents out of the best areas of the cities.

The result has been heightened spatial polarisation. Lower-income households have been forced to live further out in suburbs with inadequate public transport and jobs. Solutions for creating places in the suburbs were presented in a recent summit organised by UQ Planning.

What’s happening in cities overseas?

The innovative ways that overseas cities have responded to similar sustainability challenges can provide pathways for Australian cities to follow.

Helsinki’s experience suggests one means of overcoming a sticking point in achieving higher-density development: getting around NIMBY opposition and achieving community agreement on where denser development could go. In Helsinki, the public participated in a public participation geographic information system exercise. This mapped their preferences for areas that should not be developed for apartments.

Read more: Becoming more urban: attitudes to medium-density living are changing in Sydney and Melbourne

Well-intended planning controls can hinder higher-density development, even in desirable locations. In Los Angeles’ historic core, old office buildings lay vacant after a new CBD office precinct outside the old core was developed. Residential use requirements for on-site parking and open space and for a building setback from the front property boundary hindered the conversion of the old buildings to residential use. By relaxing these requirements, the city’s 1999 adaptive reuse ordinance was a key to regenerating the old core as a residential area.

Our cities fall short on sustainability, but planning innovations offer local solutions The adaptive reuse of historical buildings has helped regenerate downtown Los Angeles. This particular planning innovation involved a regulatory rethink. Sébastien Darchen, Author provided

The challenge of reducing car use without large public outlays remains daunting, but Seville shows one way this can be achieved. There, a complete bicycle network of 180km – 12% of the total road length in the city – has been built since 2007. Separation from car traffic has been achieved through bollards and the like, or by parked cars where the bikeway is built on a footpath.

Cycle trips now make up about 10% of total vehicle trips in Seville, six times the previous share. The driving forces for the network were the formation of a cyclists’ association, public demonstrations and the election of a left-of–centre city government that gave political support.

The demolition of motorways sounds like an extreme way of reducing car use, but the experience of Seoul shows it can have big economic and environmental benefits. The motorway built over a former stream in the central city was demolished in the early 2000s. The stream was restored to a natural state.

This has reduced air pollution and the heat island impact of the former motorway, and created an ecological passage to the main river in Seoul. Recreational and cultural amenities along the restored stream have made it a desirable area and generated new economic activities. New bus services close to the stream have replaced car access.

The strong powers and finances of the city government and a supportive mayor made the Cheonggyecheon Restoration Project possible.

Our cities fall short on sustainability, but planning innovations offer local solutions Cheonggyecheon after restoration. Sun Young Rieh/Global Planning Innovations for Urban Sustainability, Author provided

Spatial polarisation in cities results from market forces dominating urban redevelopment.

Read more: Market-driven compaction is no way to build an ecocity

The experience of Vancouver illustrates how inclusionary planning can ameliorate these forces. City-sponsored local resident groups have been at the centre of making strategies to renew the city’s low-income Downtown Eastside area.

Instead of the high-tech-based development originally proposed, priority has been given to developing employment more suited to the low-income residents’ needs, including opportunities in the informal sector. City council-owned sites have been used for social innovation hubs, services to help residents find jobs, and a street market for a street vendors’ collective.

As explained in our book, these planning innovations are mostly the product of local contextual factors. Therefore, planning innovations for Australian cities will require local involvement in shaping sustainability solutions. Incentives such as changes in regulatory frameworks and tax subsidies might also be needed to develop planning innovations.

Authors: Sebastien Darchen, Senior Lecturer in Planning, The University of Queensland

Read more http://theconversation.com/our-cities-fall-short-on-sustainability-but-planning-innovations-offer-local-solutions-107091

Restaurants Risk Compliance Issues Amid Commercial Plumber Shortage

As demand for housing, roads and facilities increases, so does the demand for trade workers. According to Infrastructure Australia, the construction i...

The Importance Of A Professional Medical Fitout Melbourne For Modern Healthcare Facilities

Healthcare environments must operate with precision, efficiency, and a strong focus on patient comfort. A well-planned medical fitout Melbourne hel...

Top Safety and Comfort Features to Consider in Family Off Road Caravans

Exploring Australia’s coastline, bush tracks or outback locations is far more enjoyable when travelling in a caravan designed for both comfort and...

“Logistical Nightmare” – Rural and Remote Communities Supply Chain Nightmares

Australia’s road logistics need major reform to counteract the supply chain issues that are hitting rural and regional communities hard. With 80% of...

The Importance Of Quality Bait Boards For Boats To Enhance Fishing Efficiency And Comfort

Fishing enthusiasts understand that having the right equipment on board makes every trip smoother and more enjoyable. One essential accessory for an...

The Essential Safety Gear Every Tradesman Needs

Across industries like construction, electrical work, plumbing, carpentry, and welding, workers face hazards every single day. For tradesmen, having...

Best POS System Features That Boost Customer Experience

Source: Unsplash Starting and scaling a retail business is unlikely possible without an effective Point of Sale (POS) system. It is the tech heartbe...

Understanding SMSF Setup Online and Why More Australians Are Choosing Digital Fund Establishment

liManaging your own superannuation gives you greater control over investments, retirement planning, and long-term financial decision-making. As inte...

Double Carport: Complete Guide to Design, Cost, and Installation

A double carport provides practical, cost-effective protection for two vehicles whilst adding value and functionality to your property. Whether you're...

How External Blinds and Awnings Improve Comfort, Privacy, and Energy Efficiency

Outdoor comfort and protection are essential for homes and commercial properties, especially in regions with strong sunlight, high UV exposure, and ...

Worksite Comfort Upgrades That Boost Team Productivity

Jobsite productivity doesn’t depend solely on tools, training, or scheduling. It also hinges on something often overlooked: worker comfort. When e...

NDIS Occupational Therapy: Your Complete Guide to Accessing Support and Services

Occupational therapy plays a crucial role in helping NDIS participants achieve their goals and improve their daily living skills. For people with disa...

How to Start Trading Futures in Australia: Markets, Margin and Regulation

Futures trading has become increasingly popular among Australian traders seeking opportunities across global commodities, indices, currencies and ener...

The Importance Of Residential Scaffolding For Safe And Efficient Home Projects

Home construction and renovation projects require reliable access systems that prioritise both worker safety and structural stability. Whether the p...

Understanding All on 4 Dental Implants and Their Benefits for Full Mouth Restoration

Tooth loss can affect daily life in many ways, including chewing difficulties, speech problems, facial changes, and reduced confidence. Modern denti...

Why Removalists Are Essential for a Smooth, Safe, and Hassle-Free Moving Experience

Moving homes or offices can be overwhelming, especially when you’re trying to balance packing, organising, heavy lifting, and time-sensitive deadl...

Understanding Domestic Violence Orders in Queensland

Domestic violence is an issue that affects many households. This article will break down the key aspects of Domestic Violence Orders (DVOs) in Queen...

Why A Smart Lock Is Becoming An Essential Upgrade For Modern Home Security

Homeowners today are placing greater importance on security, convenience and technology in their living spaces. One of the most significant advancem...