Modern Australian
Times Advertising

our research found 39% less plastic waste around Australian coastal cities than a decade ago

  • Written by Stephanie Brodie, Research Scientist in Marine Ecology, CSIRO
our research found 39% less plastic waste around Australian coastal cities than a decade ago

Picture this: you’re lounging on a beautiful beach, soaking up the sun and listening to the soothing sound of the waves. You run your hands through the warm sand, only to find a cigarette butt. Gross, right?

This disturbing scene is typical of coastal pollution in Australia. But fortunately our new research shows the problem is getting better, not worse. Over the past ten years, the amount of waste across Australian coastal cities has reduced by almost 40%. We’re also finding more places with no rubbish at all.

We surveyed for debris in and around six Australian urban areas between 2022 and 2024. Then we compared our results to previous surveys carried out a decade ago. We found less coastal pollution overall and reset a new baseline for further research.

Our study shows efforts to clean up Australia’s beaches have been working. These policies, practices and outreach campaigns have reduced the extent of pollution in coastal habitats near urban centres. But we can’t become complacent. There’s plenty of work still to be done.

A beautiful sandy beach, as seen from the cliff top.
One of the many beaches surveyed by CSIRO. TJ Lawson

What we did

In Australia, three-quarters of the rubbish on our coasts is plastic. Even cigarette butts are mainly made of plastic.

To tackle the pollution effectively, we need to understand where the waste is coming from and how it gets into the environment.

Research has shown much of the coastal debris comes from local inland areas. Poor waste management practices can result in debris eventually making its way through rivers to the coast and out to sea.

We focused on urban areas because high population density and industrial activity contributes to waste in the environment. We examined six areas across Australia:

  • Perth in Western Australia
  • Port Augusta in South Australia
  • Hobart in Tasmania
  • Newcastle in New South Wales
  • Sunshine Coast in Queensland
  • Alice Springs in the Northern Territory.
Rear view of a person involved in the survey looking out across a sandy beach, wearing a turtle-t-shirt and beach hat
CSIRO staff conducting coastal debris surveys in Tasmania. Lauren Roman

These places represent a starting point for the national baseline. At each location we studied sites on the coast, along rivers and inland, within a 100 kilometre radius.

We inspected strips of land 2m wide. This involved two trained scientists standing in an upright position looking downward, slowly walking along a line surveying for debris items. Together they captured information about every piece of debris they came across, including the type of material and what it was originally used for (where possible).

What we found

On average, we found 0.15 items of debris per square metre of land surveyed. That’s roughly one piece of rubbish every five steps.

Plastic was the most common type of waste. But in many cases it was unclear what the item was originally used for. For example, fragments of hard plastic of unknown origin were found in a quarter of all surveyed areas.

Polystyrene fragments were the most common item overall (24% of all debris fragments). Other frequently encountered items included food wrappers or labels, cigarette butts, and hard plastic bottle caps or lids.

We found more waste near farms, industry and disadvantaged areas.

The types of waste varied among cities. For example, cigarette butts were the most prevalent items in Newcastle, Perth and the Sunshine Coast. But food wrappers and beverage cans were more prevalent in Port Augusta and Alice Springs, respectively.

Hobart had the highest occurrence of beverage bottles and bottle fragments.

Map of Australia showing the cities surveyed and their most prevalent waste item. The most common type of waste varied among cities. CSIRO

Targeting problem items

Identifying the different types of litter in the environment can help policymakers and waste managers target specific items and improve waste recovery.

Research has shown container deposit legislation, which enables people to take eligible beverage containers to a collection point for a refund, has reduced the number of beverage containers in the coastal environment by 40%. Hobart did not have a container deposit scheme in place at the time of our survey.

Plastic bag bans can reduce bag litter. Now polystyrene food service items are becoming increasingly targeted by policymakers.

A plastic beverage bottle found on a Tasmanian beach during the survey. Hobart had the highest occurrence of beverage bottles and bottle fragments. Caroline Bray

Making progress

When we compared our results to the previous survey from 2011-14 we found a 39% decrease in coastal debris. We also found 16% more areas where no debris was present.

Our results support previous research that found an ongoing trend towards less waste on Australian beaches.

We think our research demonstrates the effectiveness of improved waste management policies, campaigns such as the “Five R’s – Refuse, Reduce, Reuse, Repurpose, then Recycle” – as well as clean-up efforts.

It’s likely that increased awareness is making a big dent in the problem. But reducing the production of plastic, and invoking changes further up the supply chain, would likely further help reduce mismanaged waste in the environment.

Implications for the future

Measuring and monitoring litter can inform policymaking and waste management. Our research serves as a benchmark for evaluating and informing future efforts to reduce plastic waste.

We are heartened by the findings. But continued effort is needed from people across government, industry and Australian communities. Everyone needs to address how we produce, use and dispose of plastic for a cleaner and healthier planet.

A sign on an old wooden boat reads 'no littering' Australians are increasingly aware of the need to keep the coastal environment free of litter. Qamar Schuyler

Authors: Stephanie Brodie, Research Scientist in Marine Ecology, CSIRO

Read more https://theconversation.com/good-news-beach-lovers-our-research-found-39-less-plastic-waste-around-australian-coastal-cities-than-a-decade-ago-253221

What to Know Before Getting Dental Implants: A Guide for First-Time Patients

Dental implants Perth patients often look for a long-term solution for missing teeth without the hassle of dentures or bridges. If you are thinking ...

Why Protective Packaging Matters More Than Ever In Modern Shipping

In today’s fast-paced world of logistics and eCommerce, ensuring that products reach customers safely is a top priority. This is where a bubble wrap...

Pest Control Albury: Protecting Your Property From Hidden Damage And Health Risks

Pests rarely announce their arrival. They creep into spaces quietly, turning small, unnoticed corners into breeding grounds for bigger problems. Tha...

Why Root Canal Treatment Melbourne Is Essential For Saving Natural Teeth

Tooth pain has a way of demanding attention at the worst possible time. When the discomfort becomes persistent and intense, it often signals an infe...

How Bird Flight Diverters Help Protect Wildlife Around Power Infrastructure

Power infrastructure plays an essential role in modern life, but it can also create risks for wildlife, particularly birds moving through establishe...

What Businesses Should Look for in a Commercial Coffee Partner

Choosing a commercial coffee partner is not the same as choosing a machine. It is a broader decision that affects beverage quality, staff efficiency...

3PL Logistics Australia Driving Smarter Supply Chains And Faster Deliveries

In a world where customers expect speed almost as much as quality, logistics has become the silent heartbeat of every successful business. Behind th...

Why Professional Electrical Services Are Essential For Modern Properties

Electricity powers almost every aspect of daily life, from lighting and appliances to complex systems in homes and businesses. This makes choosing a...

What Not to Pack When Moving: The Essential Guide to Smart Packing

Moving house is one of those all-encompassing events in life and most people focus their energy on deciding what to pack. But knowing what not to pa...

From Assistance to Independence: Progression in Daily Living Skills

The ultimate goal of many support systems is to empower individuals to lead lives defined by autonomy and self-reliance. While some support requiremen...

The Cost Difference Between Early Repairs and Delayed Replacement

Automotive maintenance often involves a choice between addressing a small issue immediately or waiting until a component fails completely. When it c...

What Is a Stainless Steel Bar? Applications, Benefits, and Buying Tips

Stainless steel is one of the most widely used materials across industrial and commercial sectors, known for its strength, corrosion resistance, and...

Scholars in Developing Nations Depending on Z library

Access to books often shapes the course of study for scholars who live in regions with thin library shelves and slow supply chains. Many students wo...

6 Cheapest POS Systems in Australia (2026)

The cheapest POS systems in Australia for 2026 are POSApt, Square, Zeller, Loyverse, Epos Now, and Shopify POS (Lite). However, “cheap” does no...

The Ultimate Guide to Automating Your Weekend Yard Chores

We all look forward to the weekend as a chance to unwind after a long week of work. You probably picture yourself relaxing on the patio with a cold ...

How Ignoring Regular Car Servicing Can Lead to Costly Repairs

Owning a car gives you a sweet sense of freedom and comfort. You can go wherever you want, whenever you want. But with that freedom comes responsibili...

Someone Trips at Your Fundraiser. Now What? Understanding Public Liability for NFPs

Three months of planning. Volunteers giving up their weekends. Sponsorships chased, catering sorted, tables decorated. And then, about an hour into ...

Stainless Steel Tube: A Complete Specification Guide for Engineers, Project Managers, and Industrial Buyers

Few materials in the industrial and manufacturing world are as universally relied upon — or as frequently misspecified — as stainless steel tube...